Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 13 - Jul 18
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Wheel Bearing Front 34x64x37mm for Volkswagen Caddy I, Golf I & Jetta I - 102600Vehicle Fitment & Part Details The Wheel Bearing Front is listed for the Volkswagen Caddy I (1980 2008). Size: 37mm; Dimensions: 34X64X37MM. Confirm compatibility by matching the listed fitment details. Verify VIN engine. Key Details SKU 102600 Component Wheel Bearing Specs Size: 37mm; Dimensions: 34X64X37MM Primary Fitment Volkswagen Caddy I (1980 2008) Listing Highlights Listed for selected Volkswagen applications shown in the fitment table. Size:
Vehicle Fitment & Part Details
The Wheel Bearing Front is listed for the Volkswagen Caddy I (1980-2008). Size: 37mm; Dimensions: 34X64X37MM. Confirm compatibility by matching the listed fitment details. Verify VIN/engine.
Key Details
- SKU
- 102600
- Component
- Wheel Bearing
- Specs
- Size: 37mm; Dimensions: 34X64X37MM
- Primary Fitment
- Volkswagen Caddy I (1980-2008)
Listing Highlights
- Listed for selected Volkswagen applications shown in the fitment table.
- Size: 37mm; Dimensions: 34X64X37MM.
Vehicle Fitment
Includes 17 supplied applications covering Volkswagen. Use the full table below to confirm model, chassis, year range, engine and power before ordering.
View Full Vehicle Fitment (17 applications)
| Make | Model | Chassis | Years | Engine | Power |
|---|---|---|---|---|---|
| Volkswagen | CADDY I | 14 | 1980-2008 | 1.5 JB | 51 kW / 70 HP |
| Volkswagen | CADDY I | 14 | 1980-2008 | 1.6 EW | 55 kW / 75 HP |
| Volkswagen | CADDY I | 14 | 1980-2008 | 1.6 D CR; JK; ME | 40 kW / 55 HP |
| Volkswagen | CADDY I | 14 | 1980-2008 | 1.8 JH | 70 kW / 95 HP |
| Volkswagen | GOLF I | 17 | 1974-1984 | 1.1 FA; GG | 37 kW / 50 HP |
| Volkswagen | GOLF I | 17 | 1974-1984 | 1.3 GF | 44 kW / 60 HP |
| Volkswagen | GOLF I | 17 | 1974-1984 | 1.5 JB | 51 kW / 70 HP |
| Volkswagen | GOLF I | 17 | 1974-1984 | 1.5 D CK | 37 kW / 50 HP |
| Volkswagen | GOLF I | 17 | 1974-1984 | 1.6 EW | 55 kW / 75 HP |
| Volkswagen | GOLF I | 17 | 1974-1984 | 1.6 FP | 55 kW / 75 HP |
| Volkswagen | GOLF I | 17 | 1974-1984 | 1.6 D CR; JK | 40 kW / 54 HP |
| Volkswagen | GOLF I | 17 | 1974-1984 | 1.8 GTI DX | 82 kW / 112 HP |
| Volkswagen | GOLF I Cabriolet | 155 | 1982-1993 | 1.8 DX; EV; KT; PB | 82 kW / 112 HP |
| Volkswagen | JETTA I | 16 | 1980-1985 | 1.3 GF | 44 kW / 60 HP |
| Volkswagen | JETTA I | 16 | 1980-1985 | 1.5 JB | 51 kW / 70 HP |
| Volkswagen | JETTA I | 16 | 1980-1985 | 1.6 FR | 63 kW / 85 HP |
| Volkswagen | JETTA I | 16 | 1980-1985 | 1.8 DX | 82 kW / 112 HP |
Fitment Notes
- Always match vehicle details before ordering. Verify VIN/engine.
Compatibility Verification Notes
- Confirm compatibility using VIN, engine code, chassis / platform, OE reference and original part comparison before ordering.
- Match the supplied fitment details to your vehicle, including model, year range and any listed engine or chassis information.
- Fitment data may vary by production date, market, import history and engine variant.
- This listing is for part identification and compatibility checking only. Installation must be carried out according to the vehicle manufacturer's service information by a suitably qualified person.
Common Questions
Will the Wheel Bearing Front fit my Volkswagen Caddy I?
This part (102600) is listed for the fitments shown on this page. Confirm by matching the fitment details. Verify VIN/engine.
How do I confirm fitment if there are multiple variants?
Compare the supplied fitment details, original part details and any listed variant information before ordering. Verify VIN/engine.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.5 ★★★★★
Based on 218 reviews
Sort
Product Reviews
★★★★★ 5
Creality K1 SE - Prints great with stock settings - needs a side spool mount
Set name: K2 SE, Set name: K2 SE
I bought the Creality K1 SE a little over a week ago. I had an Ender 3 S1 before this printer. The K1 SE is so, so much easier to print with right out of the box! I definitely recommend it. It's a good way to get the improvements that were built into Creality's K1C, but at a nicer price. Plus, you can install your own version of Klipper if you want.
I've printed 10 or so things in PLA and PETG, and I haven't had any failed prints. The automatic bed leveling has just worked. I have not had any problems with bed adhesion. On the Ender 3 S1, I only used a textured PEI plate, but the smooth build plate on the K1 SE works fine. The extruder cooling fan also seems ok for what I've printed so far. I printed an overhang test and the 75 degree overhang looks fine, but it had trouble at 80 degrees. The bridging test looked ok. (The longest bridge was only 25 mm on that test however.)
I've put the printer in a soft-sided enclosure that I had used for my old Ender 3 S1. (It's easy to find similar encolsures.) The LEDs on the K1 SE are bright enough to see inside which is something that I was concerned about before I purchased. However, this enclosure makes it difficult to access the back of the printer where the filament spool is mounted, so I designed a mount that clamps onto the side-bar - see the pictures. The files are on Printables - "Creality K1 SE Side Spool Mount".
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 21, 2025
★★★★★ 3
Almost Good
Set name: K2 SE
The nozzle cleaning is completely ineffective. The wiper pushes material up the sides of the nozzle and melts onto the nozzle. The result is the nozzle leaves burnt debris on the prints. The calibration before each print only probes 5 points on the bed and the results are not satisfactory, with the nozzle being variously too close or too far from the bed. To adjust the z offset you have to go through several menus and the machine seems to not remember where you set it last time. Print quality is good except for VFAs. Part cooling fan is very loud at full speed.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 5, 2026
★★★★★ 5
Assembly Tricks And Tips.
Color: Dark Grey, Size: 5 Seat
All my packages came at same time. Assembly is in 3 phases, each box had the same complete instruction book, but each phase was not completely together in the same box. I immediately started opening boxes and just separated by letters. A's here, B's here. Not all A's or the other letters are the same, but it is very easy to follow the instructions. You won't get it mixed up. 3 hardware kits, it's pretty easy. Picture Book Difficulty :) The one large headboard piece was Letter M. There was no sticker on it, but there were no M stickers either. Pretty easy.
It's not a thick grandma's pull-out bed type of couch, but seems sturdy. I probably should have got the 3 year warranty, and I only have one kid. This isn't a couch to front-flip off the island on to, but it is nice and comfy and seems to be worth the cost. Assembly took about 2-3 hours casually I think. I used impact drill. Luckily it's 1 screw head size, then the socket for the nuts basically (provided). Communication with seller was easy and transparent. Idk what else people might be looking for in these reviews. It smelled completely fine. Good purchase. They say to air it out for a while, but I just assembled it immediately it didn't mess up anything.
OH! And a little trick for the double sided threaded bolts with no head, they can get stuck hand tightening it so tighten down one of the nuts all the way to the end of the exposed thread that sticks up, and you can thread those bolts that don't have a head WAY easier using the nut as the head. Then just loosen the nut back off of it. You'll understand what I mean. Thank You
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 28, 2026
★★★★★ 5
Would buy again!!!
Color: Dark Grey, Size: 7 Seat
⭐️⭐️⭐️⭐️⭐️ Perfect Couch for Comfort, Space, and Style!
I couldn’t be happier with my purchase of the SUAWY 108 Inch Sectional Sleeper. From the moment it arrived, I knew I made the right choice. Setup was straightforward, and the couch feels incredibly sturdy and well-built. The fabric is soft to the touch yet durable enough to handle everyday use, which is perfect for both lounging and having guests over.
The size is exactly what I was looking for — spacious enough to seat a large group comfortably without feeling cramped. Whether I’m relaxing after work, having friends over, or stretching out for a nap, it provides more than enough room. The chaise and sleeper function are real game changers. The pull-out sleeper is surprisingly supportive and comfortable — not at all like the thin, saggy mattresses I’ve experienced with other sofa beds. My guests have all commented on how well they slept!
I also love the storage space built into the sectional. It’s so convenient for keeping extra blankets, pillows, or even board games tucked away neatly. This design makes it feel like the couch was made with real-life use in mind, not just looks.
Speaking of looks, the style is modern and clean, and it blends perfectly into my living room. The neutral tone makes it easy to decorate around, and it honestly makes the whole room look more put-together.
Overall, this sectional sleeper has completely exceeded my expectations. It’s comfortable, practical, stylish, and worth every penny. If you’re on the fence, don’t hesitate — this is absolutely one of the best furniture investments I’ve made. I’m genuinely so happy every time I sit down on it, and I highly recommend it to anyone looking for a large, versatile sectional.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 8, 2025
★★★★★ 4
An okay sectional
Color: Dark Grey, Size: 5 Seat, Color: Dark Grey, Size: 5 Seat
I want to give my honest review of this couch. One significant difference in the actual couch vs the photos here is the back of the couch is actually much thinner than in the photos. It’s made with metal framing that is very thin covered in fabric with no sort of padding. Also, the back of the couch does not angle back far. Which makes the couch pretty uncomfortable, as your back is up at almost a 90 degree angle.
The quality of the couch overall is good. It was easy to assemble and I didn’t really run into any issues in that regard.
Like others have said. The cushions are quite thin and also not super soft. The couch is also quite low to the ground, so if you’re looking for that oversized super soft couch, this probably isn’t the one.
I do love the pull out bed/chaise which is super nice, ans the storage is great too. For the cost of the couch I think the quality and comfort are good.
I don’t love it, I don’t hate it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 8, 2026