Shaker MDF Wall Panel Kit WPKT3

Shaker MDF Wall Panel Kit WPKT3The Shaker MDF Wall Panel Kit WPKT3 is a pre cut interior wall panelling kit that creates classic Shaker style framed panel effects on walls. Manufactured from smooth, paint ready MDF, the kit is suited to bedrooms, hallways, and living rooms in both modern and traditional homes. Specifications Property Detail Material MDF (Medium Density Fibreboard) Finish Smooth, paint ready surface Profile Slim flat strip, Shaker style Treatment None paint or prime

The Shaker MDF Wall Panel Kit WPKT3 is a pre-cut interior wall panelling kit that creates classic Shaker-style framed panel effects on walls. Manufactured from smooth, paint-ready MDF, the kit is suited to bedrooms, hallways, and living rooms in both modern and traditional homes.

Specifications

What it's used for

• Creating Shaker-style panelled feature walls in bedrooms and master suites
• Adding period-style dado panelling to hallways and landings
• Decorative wall framing in living rooms and dining areas
• Staircase wall panelling to complement newel posts and baserails

Fitting and handling

Allow the MDF strips to acclimatise in the room for at least 24 hours before fitting, particularly in rooms with underfloor heating or fluctuating humidity. Fix strips to the wall using grab adhesive, panel pins, or fine-gauge screws countersunk and filled before painting. MDF is moisture-sensitive, so store flat, off the ground, and away from damp conditions prior to installation.

FAQ

Can the Shaker MDF Wall Panel Kit WPKT3 be used in a bathroom?

This kit uses standard MDF, which is not moisture-resistant. It is not recommended for wet rooms or areas with high humidity such as bathrooms. For damp-prone areas, consider a moisture-resistant MDF board instead.

Does the kit include adhesive or fixings?

The kit contains pre-cut MDF strips and fitting instructions. Adhesive, panel pins, or screws are not included and should be sourced separately. Most fitters use a combination of grab adhesive and pins for a secure, clean finish.

What paint should I use on MDF wall panelling?

Apply a dedicated MDF primer or a water-based wood primer first to seal the surface, then finish with any standard emulsion or eggshell. Two finish coats are typically recommended for a solid, hard-wearing result.

Nottage Timber Merchants supply the Shaker MDF Wall Panel Kit WPKT3 to trade and retail customers across Bridgend and South Wales, with next-day delivery available to many local postcodes. Browse our full range of MDF sheets and boards for complementary materials.