SKU: 61305591869

NGK Spark Plug - ZKBR7A-HTU

$153.94 $171.04
Save 10%
No.2 Bestseller on watersyst.com >

Pay in installments of $42.76 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Aug 13 - Aug 18

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

NGK Spark Plug - ZKBR7A-HTUVehicle Fitment & Part Details This NGK spark plug (ZKBR7A HTU) is supplied as an OEM grade replacement. Heat range 7. Thread M12 x 1,25. Verify VIN engine before ordering. Key Details SKU ZKBR7A HTU Alternate Search Reference ZKBR7AHTU Component Spark Plug Brand NGK Heat Range 7 Part MPN 91785 GTIN Barcode 087295917855 Trade Numbers ZKBR7A HTU Product Specifications Thread Size M12 x 1,25 Thread Length [mm] 24,2 Spanner Size 14 mm Spark Position [mm]

Vehicle Fitment & Part Details

This NGK spark plug (ZKBR7A-HTU) is supplied as an OEM-grade replacement. Heat range 7. Thread M12 x 1,25. Verify VIN/engine before ordering.

Key Details

SKU
ZKBR7A-HTU
Alternate Search Reference
ZKBR7AHTU
Component
Spark Plug
Brand
NGK
Heat Range
7
Part MPN
91785
GTIN / Barcode
087295917855
Trade Numbers
ZKBR7A-HTU

Product Specifications

Thread Size
M12 x 1,25
Thread Length [mm]
24,2
Spanner Size
14 mm
Spark Position [mm]
9,3
Electrode / Construction
with gasket seat, Nickel Middle Electrode, 3 - Earthed Electrode, Interference Suppression 5 kOhm, Fixed SAE connector
Brand Class
Premium

Vehicle Compatibility

Verify VIN/engine and confirm the correct heat range and electrode design for your specific application before ordering.

OEM Reference Numbers

Vehicle OE Numbers

  • BMW: 7 550 011, 12 12 0 038 349, 0 034 091, 7 550 011 02, 12 12 7 550 011, 0 038 349, 12 12 7 550 011 02, 12 12 0 034 091
  • Mini: 7 550 011 02, 12 12 7 550 011 02, 12 12 0 038 349, 0 034 091, 7 550 010, 12 12 7 550 010, 0 038 349, 7 550 011, +2 more

Aftermarket Equivalents

Aftermarket Equivalents (Bosch)

  • ZGR 6 STE 2 W, 0 242 140 560
Alternate OEM Search References: 7550011, 12120038349, 0034091, 755001102, 12127550011, 0038349

Fitment Notes

  • Always match heat range, thread size and electrode design before ordering. Verify VIN/engine.

Important: Spark plugs are not returnable, exchangeable, or refundable once fitted. Confirm you are ordering the correct part for your vehicle. Compare the new spark plug to the removed plug for thread reach, thread diameter, hex size, electrode style, gap specification, and heat range before fitting. Mismatched spark plugs can cause misfires, pre-ignition, detonation, fouling, or engine damage.

Returns Notice: Once a spark plug has been fitted or threaded into a cylinder head, it cannot be returned, exchanged, or refunded under any circumstances.

Installation / Use / Maintenance Tips

  • Allow the engine to cool fully before removal - cylinder heads are easily damaged when warm.
  • Use the correct deep-socket plug spanner (14 mm) and avoid impact tools.
  • Inspect the existing plug for fouling, oil contamination, or worn electrodes - may indicate engine condition issues.
  • Verify the gap if your supplied plug is not factory-set; consult your service manual for the correct value.
  • Apply a small amount of anti-seize to the threads (sparingly) and torque to manufacturer specification.

Common Questions

Will this NGK spark plug fit my your vehicle?
This part (ZKBR7A-HTU) is listed for the applications shown on this page. Always confirm the correct heat range, thread size and electrode design against your vehicle's service manual or a parts lookup before ordering. Verify VIN/engine.

What does the NGK part code mean?
The NGK trade number encodes physical and performance characteristics - thread/reach, electrode design, heat rating, and projection. Each digit and letter has meaning in NGK's naming convention. The heat range is usually the standalone digit (e.g. BPR6ES is heat range 6).

What is the difference between this NGK plug and a Bosch / Champion / Denso equivalent?
The cross-references listed under OEM Reference Numbers are functionally equivalent for the same applications, but materials, electrode design and heat dissipation can differ slightly. NGK is OEM-supply quality and most manufacturers specify NGK or Denso as their factory plug.

How do I confirm fitment if my engine variant isn't listed?
Match the supplied thread size, reach, electrode design and heat range against your existing plug. If unsure, request fitment assistance before ordering.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 61305591869

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.8 ★★★★★
Based on 6 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
Q
Verified Purchase
QZ
Lowell, US
★★★★★ 5
Great Instructions, Straightforward Assembly
Color: Black
I just received this chair today, so my product review is mostly on the packaging, instructions, and assembly. The product was well-packaged, and it was obvious when I unboxed it that a lot of care and thought went into packing it in the most efficient way that would also protect the parts. I was positively impressed with the packaging. I was also incredibly impressed with the instructions and assembly process. I am used to cheaper products where the parts only half fit or important components are missing, or where the instructions were confusing and unclear. This chair's instruction manual was very clear and concise. The diagrams were easy to understand and neat. The screws came labeled and separated and also included the scew types and sizes/lengths, which is handy in case you need to pick up extras at a store somewhere. But they also included one extra of each type of screw, washer, and cover, which I appreciated during assembly. (I didn't find myself worrying what would happen if I dropped a screw, which is something I would normally be distsracted by while working.) The only things I would take points off for were these: 1. The instructions said the chair came with gloves for assembly, but no gloves were included. That was fine with me, but why mention them if you won't include them? The instructions even later say not to use the chair if not all components were present...but all the important ones were, so I assembled it without gloves (as I probably would have done anyway, since it was for me and not another person). 2. It matters which side of the seat is the front, but the sticker was confusing. The instructions show a sticker placed on the side that is the front, and that is where my sticker was placed. However, the sticker says "FRONT" and has an arrow pointing somewhere. In the instructions this arrow pointed to the front. On my seat, however, the arrow pointed to the back. So am I supposed to believe the sticker placement (it was diagonal, so it looked haphazardly slapped on) or the arrow? On that particular step the piece you are screwing into the seat can fit both ways, but thankfully there is a later step where it becomes obvious which side is the front vs. the back. (The arm rests can only be attached to the back.) So I wish that had been clearer up front, but otherwise it was okay. Recommendations for assembly: - To attach the wheels, apply firm, direct, straight-down pressure. I tried screwing them on at first but you just push. Make sure they go in the whole way like the picture shows. - When they say to tighten the screws to only 60%, it's a helpful tip, because you can't fit the armrests on both the seat and chairback at the same time with the screws completely tightened. Just tighten them enough to fit the pieces on, then later you can tighten up the screws. So far I find the chair to be very comfortable and I'm exceedingly happy with it. The lumbar support seems like it could potentially be a little chafy or scratchy, but I'll give the chair a chance before deciding if it's problematic or not. Like I said, I only got the chair today, so I can't speak much to its long-term comfort, durability, or longevity. But I was so impressed with how easy and straightforward they made the assembly that I had to write a review to show my appreciation.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 9, 2026
A
Verified Purchase
Alicia Sherman
Fort Morgan, US
★★★★★ 3
It's okay
Color: Black
Appeared to be a super comfortable chair. Purchased for my mother to work from home and the material is apparently slightly itchy and the arm rest isn't quite comfortable. It was pretty simple to put together but it did take some time.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 11, 2026
C
Verified Purchase
Corbin
Whiting, US
★★★★★ 5
An Actual Nice Chair for a Decent Price. +2 for the Tool.
Color: Black Grey
Welp, My old chair finally broke, so It was time for a new one. I ended up coming across this chair here, and I couldn't really find anyone talking about it online. I decided to give it a shot since it was on a good sale for Christmas, going down to 99$. I'm going to be honest, I am pleasantly surprised. The cushioning for it is a little firm, but that is perfect for me. Its pretty average when it comes to office chairs, but having the added lower back support is a great touch. I have no complaints about it. The one thing that I am actually really happy about isn't on the chair. Don't get me wrong, over the week I have been using it, It has been nothing but great. That thing is the actual tool it came with. Its a basic Allen key, but the top of it is a molded handle instead of a "L" piece of metal. It made the already easy process of putting together this chair even better. Even after this chair has ran its course like all other chairs, I'm going to still use this tool. So yeah, I think 5 - stars pretty accurately describes how I feel about my chair.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 2, 2026
D
Verified Purchase
DEVON
Los Angeles, US
★★★★★ 5
COMFY CHAIR GOOD SUPPORT
Color: Dark Brown
So I needed an office chair because the one that I had wasn't really helping my back any. And it just didn't have enough cushion on the chair because when you want to sit for hours at your desk you want to be comfortable. So I took a chance on buying this chair. I thought the color was good and the price was right but I was still a little nervous because it said put together. So I got it right away only took 3 days. And the directions for pretty easy there were a couple of spots that I think we're out of order because you had to kind of play around with the screws going into the holes from the arms but I think if I were to get another chair like this I would probably do it my way because it's pretty self-explanatory but I followed the directions that came with the chair. And hey I'm 65 years old and I put this chair together. It's nice it's sleek and oh my God is it comfortable!!! Right where my lower back and sciatic is I get the support and it just feels good and I know that if I have to be at my desk for 3 or 4 hours I'm going to be comfortable. I highly highly recommend getting this chair. The only issue that I had was the driver did not leave it on my porch. I had ordered a Vizio TV a couple months ago and the driver brought it up to my porch. So I just had to go out and take two steps bring it into the house I really appreciated that. This driver didn't even come through the gate and there is no signs of any dogs because there aren't any. So this driver just left this giant heavy box it was about 35 lb in front of the garage where it was very visible from the road. And I had a dragon to my front door it was heavy I did not like that at all. But it wasn't damaged or anything and I do love the chair. I just don't like what the driver did.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 3, 2025
A
Verified Purchase
Aya
Lexington, US
★★★★★ 5
Great sturdy chair and beautiful color
Color: White
I love this chair. I bought it for my home office. It is beautiful, sturdy and very comfortable. I'm not good at all with assembling even basic things but I would say that this was relatively pretty simple for someone like me to put together. Good price and good product.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 3, 2026

recommand products

Seastar Orb Kit-Add Helm/Autopilot O/B Hf6007
129.75
Seastar Hose Kit-2Pc Seastar O/B 26 Ft Ho5126
169.54
Seastar Front Mount Hydraulic Steering Cylinder Seal Kit Without Wrench Hs5167
168.19
Seastar Union Coupling 3/8 Tee (3/Pk) Hf5527
33.39
Seastar Connector Fit.3/8T X 3/8P-3/Bg Hf5532
31.59