Pay in installments of $10.75 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Aug 11 - Aug 16
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Replacement New Screen 15.6 Inch NE156FHM-NX6 B156HAN15.H 144Hz FHD LCD Display PaneliProGadgets Repair Parts 144HZ 15. 6 inch FHD Screen NE156FHM NX6 B156HAN15. H Display LCD Panel Replacement eDP 40Pins Model: NE156FHM NX6 B156HAN15. H Type: a Si TFT LCD, LCM (Liquid Crystal Module) Panel Size: 15. 6 inches (diagonal) Resolution: 19201080 (FHD) Aspect Ratio: 16: 9 Operating Mode: IPS (In Plane Switching), Normally White Brightness: Typical brightness: 250 cd m Contrast Ratio: Typical contrast ratio: 700: 1 Refresh Rate: 144Hz,
iProGadgets Repair Parts 144HZ 15.6 inch FHD Screen NE156FHM-NX6 B156HAN15.H Display LCD Panel Replacement eDP 40PinsModel: NE156FHM-NX6 B156HAN15.H
Type: a-Si TFT-LCD, LCM (Liquid Crystal Module)
Panel Size: 15.6 inches (diagonal)
Resolution: 1920×1080 (FHD)
Aspect Ratio: 16:9
Operating Mode: IPS (In-Plane Switching), Normally White
Brightness: Typical brightness: 250 cd/m²
Contrast Ratio: Typical contrast ratio: 700:1
Refresh Rate: 144Hz, suitable for gaming and high-performance applications
Interface: eDP (Embedded DisplayPort) 1.3, 4 lanes, 40 pins connector
Touchscreen: No
Strictly Tested by iProGadgets QC Team
(iProGadgets Focus on All kind of Phone /Tablet/Computer/PC Repair Parts for More than 10 Years and we Only Supply the Prime Quality Parts and Accessories ! )
Notice :
Clean the flex cable with alcohol packaging before installation and confirm that it is well connected.
Do not pull, tear or push on the flex cable, be careful during installation.
Before installing the screen, please remove the battery in advance.
Please tap the screen carefully, because the screen is too fragile to damage.
1.Each Parts be tested before shipping and good working well.
2.Please test before installation !!!
3.We are not responsible for any installation mistakes.
4.Parts is Fragile and easily broken or work unproperly by installation mistakes.If you are not good at replacing the Parts , please do it by a professional person or repair shop.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.3 ★★★★★
Based on 23 reviews
Sort
Product Reviews
★★★★★ 5
BUY THIS ONE!
Model: NewSLS50_52
This is one of the good ones. There are other brands just as good, and manny brands are worse, but this handles well, rolls down easily, doesn't come off at all easily, and adapts to dips and curves like a champ.
Appropriately heavy and dead, I'm happy with the way it smothers panel resonances and even at muffling direct sound, like a big hand over my Uncle Harry's eternally noisy mouth. You can rip the foil but you have to work hard at doing that.
Remember to buy a brayer; you can roll overlaps nice and thin. Also remember to pre-wipe the sheet metal with a decent solvent like acetone or Stoddard/Varsol. It should last forever.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 26, 2025
★★★★★ 5
Good stuff, but watch the temp
Model: NewSLS50_52
I used this in my single cab pickup truck (89 ford.) It only took half the box (10 sheets or 25 square feet) to do the floors, but I bought the big box because I plan to do the doors, back wall, and maybe the roof as well. One thing I learned is that the temperature matters when you’re doing the installation. It was around 55F when I started in the evening, and when it dipped down into the 40s the sheets would not stick to the metal, and were hard to compress with the roller. That’s why I ended up only doing the floors and not any vertical surfaces; i will have to wait for a nice hot day. The other thing is that the foil layer on top is razor sharp at the edges, definitely wear gloves! I didn’t notice until after but I have little papercuts all over my fingers. Aside from those things, the install was easy and straightforward. The sheets cut easily with scissors, and any goo that ends up on your hands or scissors can be cleaned up with acetone (nail polish remover), or lacquer thinner. I would use this stuff again.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 16, 2023
★★★★★ 5
Very efficient!
Model: NewSLS50_52
Amazing the difference it makes on dumping the noise. Very easy to install. Pell and stick literally! Great!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 23, 2025
★★★★★ 5
Cost effective
Style: 8.7 sqft（8 pcs）, Material Type: Aluminum 197 mil
Nice, cost effective material. It stuck nicely to the door and was fairly easy to use. The grid marks on the back made it easy to cut. I would not rank it up with other materials in sound and heat isolation, but it did cut down the overall vibrations on the door panels and I did not feel heat immediately from the floor area as i did with bare metal. If you are working with a budget and want modest improvement, this material will work well over most stock materials.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 7, 2026
★★★★★ 5
Good value and sticks well
Style: 8.7 sqft（8 pcs）, Material Type: Aluminum 197 mil, Style: 8.7 sqft（8 pcs）, Material Type: Aluminum 197 mil
For $14 for 8.7 square feet, this was more than enough to cover the important parts of the trunk of my 944. You DON'T need a roller to apply this, just strong hands and a well prepped surface. I vacuumed, lightly washed, then used 90% alcohol to clean the surface before applying. I could have used more and covered every inch, but there is diminishing returns in doing so (especially on a budget, or with a lower wattage sound system in my opinion). If this stuck as well as it did for me in a 45° garage, then it should stick just fine for you too. I will say, it is a little cheap feeling, but for the price I can't complain. There is an audible difference when knocking on the panels this material is applied to. I'm not a professional though, and if you're an audiophile, there are better options (but prepare to empty your wallet). Not sure I would do an entire vehicle with this material, but it is a great supplement.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 15, 2026