SKU: 65322221481

034Motorsport Sway Bar Teflon Bushing Rebuild & Upgrade Kit, 22mm - 034-402-Z060

Sale price$53.99 Regular price$59.99
Save 10%

Pay in installments of $15.00 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Aug 10 - Aug 15

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

034Motorsport Sway Bar Teflon Bushing Rebuild & Upgrade Kit, 22mm - 034-402-Z060034Motorsport Sway Bar Teflon Bushing Rebuild & Upgrade Kit, 22mm 034 402 Z060. The Sway Bar Teflon Bushing Rebuild & Upgrade Kit includes everything you need to replace the polyurethane bushings included with your 034Motorsport Sway Bar with maintenance free lifetime Teflon lined bushings. These new and improved greaseless Teflon lined bushings allow for a service free and silent driving experience! The Sway Bar Teflon Bushing Rebuild & Upgrade Kit

034Motorsport - Sway Bar Teflon Bushing Rebuild & Upgrade Kit, 22mm - 034-402-Z060.

The Sway Bar Teflon Bushing Rebuild & Upgrade Kit includes everything you need to replace the polyurethane bushings included with your 034Motorsport Sway Bar with maintenance-free lifetime Teflon-lined bushings.

These new and improved greaseless Teflon-lined bushings allow for a service-free and silent driving experience!

The Sway Bar Teflon Bushing Rebuild & Upgrade Kit includes everything you need to replace the polyurethane bushings included with your 034Motorsport Sway Bar with Teflon-lined bushings.

These maintenance-free polyurethane bushings with a Teflon and polyester liner designed to enhance sway bar response speed while minimizing noise, vibration, and harshness (NVH). This liner also results in an extended service life that allows these bushings to even outlast your vehicle. With no need for additional lubrication, these bushings offer reliable, long-lasting performance without the hassle of regular maintenance and greasing. Built to withstand extreme conditions, the bushings are hydrophobic, heat-resistant up to 500°F, and resistant to water and common automotive chemicals. These bushings are covered by a limited lifetime warranty which covers material cracking, separation of the Teflon liner and polyurethane bushing, or squeaking under normal street or track conditions.

The 034Motorsport Sway Bar Teflon Bushing Rebuild & Upgrade Kit includes 2 Teflon-lined bushings and plugs to replace the Zerk fitting that exists on your 034Motorsport Sway Bar Bracket.

Features:
Greaseless, Maintenance Free, Teflon Lined Polyurethane Bushings
Teflon and Polyester Composition Liner That Virtually Eliminates Noise, Vibration and Harshness (NVH).
Improves Sway Bar Response Speed
Extended Service Life
No Additional Lubricant Needed, and Should Not Be Added
Hydrophobic and Waterproof, Will Not Absorb Water or Be Affected In Even The Wettest Environments
Is Not Chemically Reactive and Will Not Be Affected By Common Chemicals Present In The Automotive Environment
Heat Resistant, Can Operate Continuously At Temperature Up to 500°F, Much Higher Than What Any Bushing Would See
Limited Lifetime Warranty, Covering Manufacture Defects:
Material Cracking
Separation Of Teflon Liner and Polyurethane Bushing
Squeaking Under Normal (Street/Track) Conditions.
Note: During installation, it is essential to remove all existing grease from the sway bar before installing the new Teflon-lined bushings. We recommend using a rag and a degreaser, followed by a standard cleaner, to ensure the surface is completely dry prior to installation.

Compatible with:

034-402-1021 034Motorsport Dynamic+ Sway Bar Kits, BMW E9X Chassis, Rear Sway Bar
034-402-1025 034Motorsport Dynamic+ Sway Bar Kits, BMW F2X/F3X Chassis, Rear Sway Bar
034-402-1032 034Motorsport Dynamic+ Sway Bar Kits, BMW E9X Chassis, Non-M Sway Bar Bundle, Rear Sway Bar
034-402-1033 034-402-1032 034Motorsport Dynamic+ Sway Bar Kits, BMW E9X Chassis, M Sway Bar Bundle, Rear Sway Bar
034-402-1034 034Motorsport Dynamic+ Sway Bar Kits, BMW F2X/F3X Chassis, Sway Bar Bundle, Rear Sway Bar
034-402-1002 Adjustable Solid Rear Sway Bar, 8J/8P Audi TT/TTS/TTRS & A3/S3/RS3, MkV/MkVI Volkswagen R32 & Golf R
034-402-1006 Adjustable Solid Rear Sway Bar Upgrade, MQB and MQB-Evo AWD
034-402-1010 034Motorsport Dynamic+ Adjustable Rear Sway Bar, B9/B9.5 Audi A4/S4, A5/S5/RS5, Allroad

Fitment:

Make Model Years Chassis Engine
Audi A3 2006-2013 8P 2.0 TDI
Audi A3 2006-2013 8P 2.0 TSI
Audi A3 2006-2013 8P 2.0T FSI
Audi A3 2006-2008 8P 3.2 VR6 24V
Audi A3 2015-2016 8V 1.8 TFSI
Audi A3 2015-2016 8V 2.0 TDI
Audi A3 2015-2020 8V/8V.5 2.0 TFSI
Audi A3 2022-Present 8Y 2.0 TFSI
Audi A4 2017-Present B9/B9.5 2.0 TFSI
Audi A5 2018-Present B9/B9.5 2.0 TFSI
Audi allroad 2017-Present B9/B9.5 2.0 TFSI
Audi RS3 2011-2013 8P 2.5 TFSI
Audi RS4 2018-Present B9/B9.5 2.9 TFSI
Audi RS5 2018-Present B9/B9.5 2.9 TFSI
Audi S3 2005-2016 8P 2.0T FSI
Audi S3 2015-2020 8V/8V.5 2.0 TFSI
Audi S3 2022-Present 8Y 2.0 TFSI
Audi S4 2018-Present B9/B9.5 3.0 TFSI
Audi S5 2018-Present B9/B9.5 3.0 TFSI
Audi TT 2008-2015 8J 2.0 TFSI
Audi TT 2008-2015 8J 2.0 TSI
Audi TT 2008-2015 8J 2.0T FSI
Audi TT 2016-2020 8S 2.0T Gen 3
Audi TTS 2008-2015 8J 2.0T FSI
Audi TTS 2016-2020 8S 2.0T Gen 3
VW Golf SportWagen 2015-2020 MkV7/MkV7.5 1.8T Gen3
VW Golf Alltrack 2015-2020 MkV7/MkV7.5 1.8T Gen3
VW Golf R 2012-2013 Mk6 2.0 T FSI
VW Golf R 2015-2019 Mk7/Mk7.5 2.0 TSI Gen 3
VW Golf R 2021-Present Mk8 2.0T Gen4
VW R32 2008 Mk5 3.2L VR6 24V
Cupra Ateca 2016-2021 Mk1 (AWD) 2.0 TSI
Cupra Formentor 2021-Present Mk1 (AWD) 2.0 TSI
Seat Leon 2012-2020 Mk1 (AWD) 2.0 TSI
Skoda Kodiaq 2017-Present Mk1 (AWD) 2.0 TSI
Skoda Octavia 2013-2020 Mk3 2.0 TSI
Skoda Superb 2015-Present B8 2.0 TSI
Seat Tarraco 2019-2021 MQB (AWD) 2.0 TSI
BMW 128i 2008-2013 E8X N52 3.0L
BMW 135i 2008-2013 E8X N54 3.0L
BMW 135i 2008-2013 E8X N55 3.0L
BMW 135is 2008-2013 E8X N54 3.0L
BMW 325i 2006-2013 E9X N52 2.5L
BMW 328i 2006-2013 E9X N52 3.0L
BMW 330i 2006-2013 E9X N52 3.0L
BMW 335i 2006-2013 E9X N54 3.0L
BMW 335i 2006-2013 E9X N55 3.0L
BMW 335d 2006-2012 E9X N57 3.0L
BMW 335is 2006-2013 E9X N54 3.0L
BMW M3 2006-2013 E9X S65 4.0L
Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 65322221481

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.5 ★★★★★
Based on 12 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
J
Verified Purchase
jc
Cuba, US
★★★★★ 4
The basic set-up is relatively easy which was a big plus for me......
First let me start off by saying that I am not an audiophile. So, this review will not get into the weeds of the more complex settings this receiver is capable of. For example, the Dirac room measuring option. No way was I attempting to mess with that. Especially, after reading that some reviewers who actually have experience with Dirac found it could be confusing/difficult to set up. Besides I come from a previous Onkyo the TX-SR607 which had the AccuEQ Room Calibration similar to this receiver, so I used that instead with no issues. As far as hooking up the speakers it's pretty straight forward. If you have banana plugs, use them, seriously. I originally planned on using banana plugs but in order to save time I decided against that. But I wish I had taken the extra time to go with bananas because trying to thread the speaker wire into the speaker terminals is tedious, there not much room between the terminals and even me with my skinny fingers struggled a bit. Wish Onkyo designed their terminals side by side, but I think only Denon does that. Anyway, after all the speakers were connected (I'm currently using a 5.1.2 setup) and I connected my tv, Blu-ray player, CD player, etc., etc., I ran the AccuEQ Room Calibration, and I was good to go. I did change the some of the settings like speaker volume that AccuEQ has set but nothing major. I have noticed that I need to turn the volume up much higher on this Onkyo than on my previous one. What I mean by that is that on my previous Onkyo I would set the volume indicator at around 30-35 tops for movies. With this one it's more like 40-45, maybe how the volume is measured is different on this one. The sound is excellent for movies and music I have no complaints there. I have only tried a few of features so far like Airplay but will dig deeper into the manual (I downloaded from the internet) as time goes by. I will say as far as build quality is concerned it's not bad, but IMO my old Onkyo, a 2009 model, had the look and feel of a more expensive receiver. But it's what's inside that matters most so hopefully this one last as long as my previous Onkyo.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 22, 2024
J
Verified Purchase
JOKER
Battle Creek, US
★★★★★ 1
Sound unexpectantly blasted for no reason. It malfunctioned!
I spent hours between installation and set up! I had to return it. I turned on NET (network) to play Sirius Xm and the volume was low but after a few minutes the sound turned all the way up to maximum completely on its own? This happened at least two more times. I contacted ONKYO and was told it is clearly defective and that their is no solution to correct the problem, and that I should return it immediately! I purchased the newer model and am pleased with its performance! It’s unfortunate because the first one that had the issue with the sound really played nice, but having sound change its volume so suddenly to its full capacity was not what I expected, nor felt comfortable enough to keep as I said I was told to return it, which I did! My advice here would be to purchase the newer model, which seems to be much more stable in its performance, and the quality is excellent.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 29, 2025
B
Verified Purchase
Bossman
Massapequa, US
★★★★★ 5
Absolutely Love This Receiver
The Onkyo TX‑NR7100 has completely transformed my home theater. The sound quality is rich, detailed, and powerful, and the 9.2‑channel setup gives movies and music a level of immersion I didn’t realize I was missing. Dirac Live right out of the box is a huge win — the room correction made an immediate, noticeable improvement. Setup was smooth, the interface is clean, and everything from streaming to switching inputs feels fast and reliable. It also plays perfectly with the rest of my system, and the THX certification really shows in how cinematic everything sounds. I absolutely love this receiver. It’s one of those upgrades that makes you wonder why you didn’t do it sooner.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 20, 2026
J
Verified Purchase
James Tepper
Cuba, US
★★★★★ 5
Incredible 9.2 Surround receiver at an unbeatable price.
I may return at a future date to give a more complete review, but others that are much more knowledgeable about audio equipment than I have already done so. For me, the Onkyo (Onkyo TX-NR7100 9.2-Channel 8K/4K Network A/V Receiver) replaced a much older (2001) TX DS787 5.1 100 W Surround receiver that listed new for around $1050. I probably didn't pay quite that much but certainly something near $900. It was great for its time, perhaps even advanced with THX, Dolby, and other listening modes. But it didn't have: HDMI inputs or outputs, any BlueTooth capability, no hard wired or WiFi connectivity or basically any operating or connection modes that most all modern receivers have. This turned into a big problem with modern LED/LCD/OLED TVs, Alexa and other now common devices. I bought my new Onkyo TX-NR7100 from Amazon for $625. Other retailers (e.g.Best Buy) advertise it for up to $1200, so Amazon's price is outstanding. Set up was far more complicated (for me) than any previous receiver that I ever owned, mostly because there were a very large number of back panel input and output jacks, to and from the TV, as well as speaker outputs for 9.2 surround. Suffice it to say that once everything was connected properly (I made a few mistakes along the way), I was completely thrilled. The On Screen Display, completely accessible either from the front panel or the remote was far superior to anything I had ever seen before. Literally every operating parameter is accessible to the user. And I used most of them. It is also completely WiFi ready so my 150 Gbit home Wifi network lets it connect wirelessly and stream music error free. BlueTooth is also another way to connect almost any device to it for audio and audio/video playback if you connect the digital connections to and from a modern TV. It also speaks and listens to Alexa, although I must confess that I haven't played around with that much yet. This is already much longer than I had intended, so let it suffice to say that the Onkyo TX-NR7100 is an absolutely incredible receiver for an incredible price. I'd give it 8 stars if I could. JM TEPPER
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 7, 2024
B
Verified Purchase
Brian M.
Grantham, US
★★★★★ 5
Sounds great.
Just received my Onkyo TX-NR 7100, watched a few YouTube videos before it arrived, so set up was easy. Ran accuEQ, I am getting new front speakers so I’ll wait to run Dirac. After accuEQ, I still had to make a few adjustments, to the speaker levels and especially the sub. It set my subwoofer way too low. As of right now having no problems with Bluetooth. I’ve only listened to music so far, can’t wait to watch a movie. For now I have a 5.1.2. System, getting new fronts, the Klipsch r51-m’s will go to the rear surround and Klipsch r41-m’s will be my height speakers in a 5.1.4 system. So far loving this avr. Update 2: Just calibrated with Dirac for the 6th time. They tell you if you sit in a recliner, reclined measure with it reclined. Well I measured with the chair in its upright position. It makes a huge difference I hear the surrounds much better. Btw I listen to all channel stereo, I know audiophiles say it sucks, however I listened to 2 channel stereo for 20 years, when there was nothing else. I didn’t buy a 9 channel avr to listen to 2 channel stereo. Like Randy the cheap audio man says “ audiophiles aren’t always right. If it sounds good to you, that’s all that matters.” So try calibrating in the upright position, or if you sit on a stationary chair or couch, try positioning the mic slightly forward of your listening position. It makes a huge difference. Hope this helps, enjoy. Update: Ok bought Klipsch rp-600m speakers for the front with 52c center. 51m surrounds, 41m rear heights. Polk owm3 front heights. Why Polk? Lighter easy to hang and as height speakers they are only there for atmos. Ran Dirac live, the application does what it would take several hours to make it sound like it does, if I even could get it to sound so good. Apple TV 4K with my Hisense U8K. The google tv interface is ok, but Apple TV is faster and easier. The Onkyo 7100 is a gem, runs pretty warm but I have it out in the open. If you are going to put in a cabinet I suggest a fan. Very happy with the whole system.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 11, 2025

recommand products