Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 14 - Jul 19
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
LC1F330F7Main Range TeSys Product name TeSys F Product or component type Contactor Device short name LC1F Contactor application Motor control Resistive load Utilisation category AC 4 AC 1 AC 3 Poles description 3P Power pole contact composition 3 NO [Ue] rated operational voltage <= 1000 V AC 50 60 Hz <= 460 V DC [Ie] rated operational current 400 A (at <40 C) at <= 440 V AC AC 1 330 A (at <55 C) at <= 440 V AC AC 3 Motor power kW 160 kW at 380 400 V AC 50 60
Main
| Range | TeSys |
| Product name | TeSys F |
| Product or component type | Contactor |
| Device short name | LC1F |
| Contactor application | Motor control Resistive load |
| Utilisation category | AC-4 AC-1 AC-3 |
| Poles description | 3P |
| Power pole contact composition | 3 NO |
| [Ue] rated operational voltage | <= 1000 V AC 50/60 Hz <= 460 V DC |
| [Ie] rated operational current | 400 A (at <40 °C) at <= 440 V AC AC-1 330 A (at <55 °C) at <= 440 V AC AC-3 |
| Motor power kW | 160 kW at 380...400 V AC 50/60 Hz (AC-3) 180 kW at 415 V AC 50/60 Hz (AC-3) 200 kW at 440 V AC 50/60 Hz (AC-3) 200 kW at 500 V AC 50/60 Hz (AC-3) 220 kW at 660...690 V AC 50/60 Hz (AC-3) 160 kW at 1000 V AC 50/60 Hz (AC-3) 100 kW at 220...230 V AC 50/60 Hz (AC-3) 59 kW at 400 V AC 50/60 Hz (AC-4) |
| [Uc] control circuit voltage | 110 V AC 40...400 Hz |
Complementary
| [Uimp] rated impulse withstand voltage | 8 kV |
| Overvoltage category | III |
| [Ith] conventional free air thermal current | 400 A (at 40 °C) |
| Rated breaking capacity | 2640 A conforming to IEC 60947-4-1 |
| [Icw] rated short-time withstand current | 2650 A 40 °C - 10 s 1800 A 40 °C - 30 s 1300 A 40 °C - 1 min 900 A 40 °C - 3 min 750 A 40 °C - 10 min |
| Associated fuse rating | 400 A aM at <= 440 V 500 A gG at <= 440 V |
| Average impedance | 0.28 mOhm - Ith 400 A 50 Hz |
| [Ui] rated insulation voltage | 1000 V conforming to IEC 60947-4-1 1500 V conforming to VDE 0110 group C |
| Power dissipation per pole | 44 W AC-1 31 W AC-3 |
| Mounting support | Plate |
| Standards | EN 60947-1 JIS C8201-4-1 EN 60947-4-1 IEC 60947-4-1 IEC 60947-1 |
| Product certifications | BV DNV CSA ABS UL CB RMRoS LROS (Lloyds register of shipping) RINA |
| Connections - terminals | Control circuit: screw clamp terminals 1 cable(s) 1…4 mm²flexible without cable end Control circuit: screw clamp terminals 2 cable(s) 1…4 mm²flexible without cable end Control circuit: screw clamp terminals 1 cable(s) 1…4 mm²flexible with cable end Control circuit: screw clamp terminals 2 cable(s) 1…2.5 mm²flexible with cable end Control circuit: screw clamp terminals 1 cable(s) 1…4 mm²solid without cable end Control circuit: screw clamp terminals 2 cable(s) 1…4 mm²solid without cable end Power circuit: lugs-ring terminals 1 cable(s) 240 mm² Power circuit: bar 2 cable(s) - busbar cross section: 30 x 5 mm Power circuit: bolted connection |
| Tightening torque | Control circuit: 1.2 N.m Power circuit: 35 N.m |
| Control circuit voltage limits | Operational: 0.85...1.1 Uc 40...400 Hz (at 55 °C) Drop-out: 0.35...0.55 Uc 40...400 Hz (at 55 °C) |
| Inrush power in VA | 650 VA 40...400 Hz cos phi 0.9 (at 20 °C) |
| Hold-in power consumption in VA | 10 VA 40...400 Hz cos phi 0.9 (at 20 °C) |
| Heat dissipation | 8 W |
| Operating time | 40...65 ms closing 100...170 ms opening |
| Mechanical durability | 10 Mcycles |
| Maximum operating rate | 2400 cyc/h 55 °C |
| Compatibility code | LC1F |
| Motor power range | 55…100 kW at 200…240 V 3 phases 110…220 kW at 480…500 V 3 phases 110…220 kW at 380…440 V 3 phases |
| Motor starter type | Direct on-line contactor |
| Contactor coil voltage | 110 V AC standard |
Environment
| IP degree of protection | IP20 front face with shrouds conforming to IEC 60529 IP20 front face with shrouds conforming to VDE 0106 |
| Protective treatment | TH |
| Ambient air temperature for operation | -5…55 °C |
| Ambient air temperature for storage | -60…80 °C |
| Permissible ambient air temperature around the device | -40…70 °C |
| Operating altitude | 3000 m without |
| Height | 206 mm |
| Width | 213 mm |
| Depth | 219 mm |
| Net weight | 8.6 kg |
Offer Sustainability
| Sustainable offer status | Green Premium product |
| REACh Regulation | REACh Declaration |
| EU RoHS Directive | Under investigation |
| Mercury free | Yes |
| RoHS exemption information | Yes |
| China RoHS Regulation | China RoHS declaration |
| Environmental Disclosure | Product Environmental Profile |
| Circularity Profile | End of Life Information |
| WEEE | The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins |
Contractual warranty
| Warranty | 18 months |
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.9 ★★★★★
Based on 1380 reviews
Sort
Product Reviews
★★★★★ 5
Awesome -- they work perfectly
Style: Updated 3.46in Magnet L Red Hooks 2PCS
Got these to store a DeWalt cordless drill and impact driver on the side of a Gladiator garage cabinet -- and they work perfectly for that. The magnet is incredibly strong, easily supporting the bare tools, and seems even to work perfectly well with an 8ah XR battery on the tool -- not that it's necessary since I don't store them like that. I like that the magnet is padded with rubber. Very nice units, I will get more for sure to store other items.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 26, 2026
★★★★★ 5
Incredibly strong magnets and thick, robust hooks. Excellent combination!
Style: Updated 3.46in Magnet L Red Hooks 2PCS
These magnetic hooks are really strong. Seriously! Each part is made to carry weight and last. The hooks are built out of thick steel stock. They bolt up to large magnets that grab onto steel surfaces and won't let go. The cabinets in my shop are all steel so these worked perfectly on the sides of the lower units. I have a few #12 AWG extension cords that are bulky and heavy. Truthfully, I didn't think these hooks would handle them. They do without any issue. Another application is a 30' long #10/4 AWG SO cable that powers my powder coating oven. It's usually unplugged and wrapped up. It would often end up on the floor where it was constantly in the way. The outside of the oven is all steel but I didn't want to make holes in it for cable hangers. Again, I didn't think that these magnetic hooks could possibly be strong enough to handle the weight of that cable but they do. And once they're attached, it takes a lot of effort to remove them! Amazing performance!!
I'm thrilled with these magnetic hooks. They are super strong and, obviously, simple to use. Importantly, they stay in place as they should. I wholeheartedly recommend these hooks to anyone. Great product!
Incredibly strong magnets and thick, robust hooks. Excellent combination!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 12, 2026
★★★★★ 5
Great for the storm shelter!
Style: Updated 3.46in Magnet L Red Hooks 2PCS, Style: Updated 3.46in Magnet L Red Hooks 2PCS
In our storm shelter we had some lights that we tried to hang up, multiple times, with no luck! Then I found these garage hooks. They are overkill for the lights, but I’m so happy that we now have lighting in the storm shelter. I could think of so many other uses for these. They strength of the magnets is awesome!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 19, 2026
★★★★★ 4
Magnet is super strong but hooks are not adjustable
Style: Updated 3.46in Magnet L Red Hooks 2PCS, Style: Updated 3.46in Magnet L Red Hooks 2PCS
I ordered this set of Mutuactor magnetic hooks because I was tired of thinking I had things organized and then finding previously hung magnets have slid down the wall.
It was a first for me to have to assemble a magnetic hook. This was made slightly more difficult by requiring a wrench. So many items these days arrive with a disposable little hex wrench or whatever is needed for assembly. Not in this case. Maybe the manufacturer assumes if you are spending $15 per magnet to hang your tools you have a wrench handy. Anyway, I got my wrench and found no instructions. I know from life that the order is bolt-washer-lock washer-nut. The next question arose when I found one bolt and several holes... hmmmm. It looks like they wanted to provide the option to screw the hooks directly to the wall. I am not sure the average person would pay that price just for a hook, though. I chose a hole and it seems to be the right one.
The good news is I was quickly in business. Soon one magnet was snatched by my husband for his rolling tool cart. He hung his (very heavy) Sawzall and the magnet never moved. He liked the rubber coating that protects his tools. I chose to take advantage of the amazing grip of this thing to hang my most used (and also very heavy) all-clad pan from the side of my fridge. The refrigerator had some sort of glossy powder coat and magnets hold well if you try to pull them straight off but end up sliding down anyway. This is where I came to appreciate the rubber shoe of this magnet. It protects my fridge but I think it plays an essential part in the grip strength of the magnet. I can not slide it around - I need to use two hands to pull it off then place it in another position.
To give a magnet strength example I had one magnetic hook on my desk as I was writing this review. My nearby desk-size scotch tape dispenser came sliding over and the magnet grabbed it. I was able to lift the tape dispense just by the magnet grabbing the little piece of metal serrated teeth that cut the tape. There is no other metal in my dispenser. That's it!
In summary, four stars because it REALLY grips and holds a lot of weight. Minus a star because I do think they are a little expensive, they required assembly without tools or instructions, and the hooks themselves are not adjustable. I have some similar magnetic hooks and you can move the two prongs apart or together depending on what your tool size is. These prongs are strong and firm and are not moving and this cuts down of the number of uses a little bit.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 12, 2026
★★★★★ 5
Develop some quality, worth-while hangups!
Style: Updated 3.46in Magnet L Red Hooks 2PCS, Style: Updated 3.46in Magnet L Red Hooks 2PCS
Organization is key for any shop space. This goes double for smaller shops. If you look around and DON'T see something that could benefit from getting off the floor and onto a peg or hook, I applaud you! For the rest of us, where can we get started? Here you go.
These hooks come two in a package. The quality of these are easy to see. The powder coating is very nice as powder coating is more durable than paint. The orange plastic coating on the hooks feels thick and durable. Assembly is easy. There's a threaded post sticking out of the black rubber coated magnet "puck" that you insert into a opening on the hook and secure with washers and a nut. I like that they included both a washer and locking washer. If it matters, I always stack the fastener in the following order: washer, locking washer, then nut. Using a 14mm socket, I was done in no time.
How's much will these hooks hold? The magnetic power on these hooks feels substantial. When I slowly approached the side of my metal toolbox, the magnet made an audible snap when it magnetized to the side. It felt strong! The bend at the base of the hook added stability pressing against the toolbox but didn't mark the surface since it was covered by plastic. It held my heavy 50a extension cable and the other hook held both my 25' and 50' pressure washer hoses. Neither moved at all and felt very secure.
Whether your shop is your garage or basement, making the most of your space makes a difference and these can help. These are very strong and hold items safely. I'm very happy having these around and will be getting more. If you have a metal surface that you can attach hooks, give these a try. It's a quality solution!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 21, 2026
recommand products
HKM-056979 Unisex Waterproof PU Leather Briefcase with Trolley Slot for Laptops - 36*26*3cm
84.99
ACCESS 64249 TOOLBOX Tonneau Cover for 19-ON Ram 1500 6' 4 Box
290.27
ACCESS 61229 TOOLBOX Tonneau Cover
290.27
HKM-419731 Cute 15.6 Inch Women's Laptop Bag - Stylish Computer Handbag for Work and Daily Use
89.99
HKM-794835 Large Capacity Waterproof Laptop Briefcase Made with PU Leather for Men
82.99