Lo-Chlor Filter & Tile Cleaner - 1 qt

Lo-Chlor Filter & Tile Cleaner - 1 qtThe Lo Chlor Filter and Tile Cleaner is a simple to use spray bottle that cleans off filter cartridges and tile scale build up. This product will effectively remove grimy buildup and waterline marks on your tile surfaces. Not only will this product make your filter efficiency better and clean your surfaces, but it will not affect your pools chemistry while doing so. Effective cleaner for cartridge filters and D. E. Grids Clears up grime and waterline

The Lo-Chlor Filter and Tile Cleaner is a simple to use spray bottle that cleans off filter cartridges and tile scale build up. This product will effectively remove grimy buildup and waterline marks on your tile surfaces. Not only will this product make your filter efficiency better and clean your surfaces, but it will not affect your pools chemistry while doing so.

• Effective cleaner for cartridge filters and D.E. Grids
• Clears up grime and waterline marks in tile and vinyl pools
• Does not affect pool chemistry

Directions

Multi-Purpose Cleaning:

Spray. Rinse. Brush.

Cartridge Filters and D.E. Grids:

Remove filter element from housing and use water hose to clear large debris from the filter/element.

Spray Method: Spray product into all pleats and crevices. Allow to soak for 5 - 10 minutes then rinse with plenty of fresh water. Replace filter/element.

Soak Method: Partly fill a large bucket with water and the add the contents of Filter and Tile Cleaner to water. Place filter element in bucket and add water to bucket until element is completely covered or bucket is full. If filter is too large for bucket, soak one end of the filter then flip the filter element. Keep both ends damp by flipping occasionally. Allow filter to soak for a minimum of 1 hour. Soak up to 8 hours for deep cleaning. Remove filter element from bucket and rinse with plenty of water. Replace filter element.