SKU: 98865247086

SparkFun RTK Surveyor Kit

Sale price$224.96 Regular price$249.96
Save 10%

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 14 - Jul 19

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

SparkFun RTK Surveyor KitPLEASE NOTE: No UK power supply is included with this kit. You will need to supply our own appropriate USB 5V, 2A charger supply. The RTK Surveyor is a Bluetooth enabled multi band GNSS receiver based on the ESP32 from Espressif and the ZED F9P from u blox. Flip the switch and you'll have 300mm approximate accuracy out of the box and 18mm accuracy with RTCM corrections. This kit provides the L1 L2 antenna, adapters, interface cables, and chargers

PLEASE NOTE: No UK power supply is included with this kit. You will need to supply our own appropriate USB 5V, 2A charger / supply.

The RTK Surveyor is a Bluetooth® enabled multi-band GNSS receiver based on the ESP32 from Espressif and the ZED-F9P from u-blox. Flip the switch and you'll have 300mm approximate accuracy out of the box and 18mm accuracy with RTCM corrections. This kit provides the L1/L2 antenna, adapters, interface cables, and chargers needed for general GNSS use.

We generally recommend using your cellular phone as the radio backhaul for RTCM but you can also use your own, higher power radios as long as they support 57600bps. We also recommend logging all data to your phone over Bluetooth. This is as simple as checking a box within SW Maps. But if you prefer to do long surveys, or need to deal with RAWX measurements where a phone will not be present, a microSD card should be purchased (any size up to 32GB).

Please keep in mind that you will need to provide your own mono-pod or tripod as well as a cell-phone type holder for securing the RTK Surveyor to your mono-pod or tripod.

Note: The L1/L2 antenna has a 5/8" thread which will fit most surveying platforms. The kit includes a 5/8" to 1/4" adapter as well which will fit most camera mono-pods and tripods. You may need additional adapters for your specific equipment.

Sparkfun RTK Comparison

RTK Surveyor

A versatile enclosed device that can be used either for centimeter accuracy positioning or as a base station.

Rover Base IMU Display Receiver Antenna Battery Application
Yes Yes No No u-blox
ZED-F9P
External 1000mAh Surveying or Base

RTK Express

We've taken everything that is good about the RTK Surveyor and upgraded with a display, a better battery and an accelerometer for digital leveling.

Rover Base IMU Display Receiver Antenna Battery Application
Yes Yes No Yes u-blox
ZED-F9P
External 1300mAh Surveying or Base

RTK Express Plus

RTK Express Plus adds an internal IMU to combine real-time GNSS tracking with advanced sensor fusion. The result is accurate positioning even when GNSS is lost in tunnels, parking garages, etc.

Rover Base IMU Display Receiver Antenna Battery Application
Yes No Yes Yes u-blox
ZED-F9P
External 1300mAh Surveying

Features

GNSS Receiver: ZED-F9P

  • Concurrent reception of GPS, GLONASS, Galileo and BeiDou
  • Receives both L1C/A and L2C bands
  • Current: 68mA - 130mA (varies with constellations and tracking state)
  • Time to First Fix: 25s (cold), 2s (hot)
  • Max Navigation Rate:
    • PVT (basic location over UBX binary protocol) - 25Hz
    • RTK - 20Hz
    • Raw - 25Hz
  • Horizontal Position Accuracy:
    • 2.5m without RTK
    • 0.010m with RTK
  • Max Altitude: 50km (31 miles)
  • Max Velocity: 500m/s (1118mph)

Bluetooth® Transceiver: ESP32 WROOM

  • Xtensa® dual-core 32-bit LX6 microprocessor
  • Up to 240MHz clock frequency
  • 16MB of flash storage
  • 520kB internal SRAM
  • Integrated 802.11 BGN WiFi transceiver
  • Integrated dual-mode Bluetooth® (classic and BLE)
  • Hardware accelerated encryption (AES, SHA2, ECC, RSA-4096)
  • 2.5 µA deep sleep current

Overall Device

  • Internal Battery: LiPo 1000mAh with 500mA charging
  • Radio Port: 3.3V TTL Serial (57600bps RTCM TX/RX, configurable)
  • Data Port: 3.3V TTL Serial (460800bps NMEA, configurable)
  • Toggle switch controls
  • Weight: 162g (entire device including battery)
  • Dimensions: 132mm x 101mm x 32mm (5.2in x 3.9in x 1.2in)
  • 1x Qwiic Connector
  • 1x microSD Socket for optional logging

GNSS Multi-Band L1/L2 Surveying Antenna

  • Gain: ≥5dBi
  • LNA Gain: 40dB
  • Reception Frequencies
    • L1: 1555 to 1615MHz
    • L2: 1198 to 1278MHz
  • 50 Ohm Antenna Impedance
  • Overall antenna weight: 335g
  • Bare antenna element weight (including MMCX connector, with RF shield): 160g
  • Dimensions: 148 x 55mm
  • Waterproof IP67
  • Connector: Female TNC

Included

  • SparkFun RTK Surveyor
    RTK Kit Carrying Case
    GNSS L1/L2 Multi-Band Antenna - TOP106
    Antenna Interface Cable - SMA to TNC (300mm)
    1/4" to 5/8" Antenna Thread Adapter
    USB Wall Charger - 5V, 2A (USA PLUG)
    USB A to C Cable - 0.8m
    Data Cable
    Radio Cable
  • RTK Kit Carrying Case
  • GNSS L1/L2 Multi-Band Antenna - TOP106
  • Antenna Interface Cable - SMA to TNC (300mm)
  • 1/4" to 5/8" Antenna Thread Adapter
  • USB A to C Cable - 0.8m
  • Data Cable
  • Radio Cable

Required:

  • Appropriate 5V, 2A USB power supply / Charger

Not Included/Optional:

Resources

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 98865247086

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.1 ★★★★★
Based on 863 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
S
Verified Purchase
Solteroblues
Lexington, US
★★★★★ 5
Perfect replacement
Fit perfectly saved a bunch of money
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 7, 2025
A
Verified Purchase
Anthony N.
Bozeman, US
★★★★★ 3
It’s ok for a short period of time.
Meh….the filter is glued at each end versus clamped into the housing like the OEM filter. Will probably get a different brand or OEM in the near future.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 18, 2026
U
Verified Purchase
username
Waukegan, US
★★★★★ 5
Good Replacement from Third Party
Perfect fit and great price. Would recommend.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 1, 2025
G
Verified Purchase
gconn76
Grantham, US
★★★★★ 5
Perfect fit
Fit well. Looks nearly identical to the OEM filter.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 18, 2025
N
Verified Purchase
Nicole Dyson
San Leandro, US
★★★★★ 5
perfect fit for my CRV
Size: 26"+17"+B12", Style: J-HOOK
These wiper blades fit my Honda CR-V exactly as described. All three sizes were correct and clipped right onto the U/J hook arms without any hassle. Installation was quick and straightforward, even if you are not very handy. Once installed, they wipe evenly with no streaks or skipping. They are quiet and make good contact with the windshield, even during heavier rain. The rear wiper works just as well as the front ones, which is a nice bonus since some sets overlook that. Overall, this set feels like a solid OEM-style replacement at a good value. Works great and looks clean on the car. Very satisfied with this purchase.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 25, 2026

recommand products