SKU: 59417692845

Passe-Partout 70x100 cm - Fotomaat 61x91,5 cm - Grijs - Voor fotolijsten

$31.46 $34.95
Save 10%
No.2 Bestseller on watersyst.com >

Pay in installments of $8.74 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Aug 16 - Aug 21

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Passe-Partout 70x100 cm - Fotomaat 61x91,5 cm - Grijs - Voor fotolijstenDe Passe Partout 70x100cm Grijs is geschikt voor een fotolijst met een lijstmaat van 70x100cm. De opening (fotomaat) van deze passe partout is geschikt voor een foto met een afmeting van 61x91,5cm. Het gat, op de foto binnen uitsnede genoemd, maken we echter iets kleiner (ongeveer 0,2 mm aan alle zijden), zodat je inlijsting niet door de opening van het passe partout heen valt. Je verliest dus aan de randen van je afbeelding een paar millimeter, omdat

De Passe Partout 70x100cm Grijs is geschikt voor een fotolijst met een lijstmaat van 70x100cm.

De opening (fotomaat) van deze passe-partout is geschikt voor een foto met een afmeting van 61x91,5cm. Het gat, op de foto binnen uitsnede genoemd, maken we echter iets kleiner (ongeveer 0,2 mm aan alle zijden), zodat je inlijsting niet door de opening van het passe partout heen valt. Je verliest dus aan de randen van je afbeelding een paar millimeter, omdat het passe-partout hier overheen valt.

Lijstmaat en fotomaat
Elke passe-partout heeft een lijstmaat en een fotomaat. De lijstmaat van het passe-partout geeft aan voor welke fotolijst het passe-partout geschikt is. De fotomaat is de exacte maat van de poster, kunstreproductie of foto waar het passe-partout omheen komt.

Nederlandse kwaliteit
Het passe-partout karton kopen wij rechtstreeks in bij de fabrikant. De passe-partouts worden in onze eigen fabriek gemaakt. Dezelfde fabriek waar ook al onze wissellijsten en fotolijsten worden gemaakt. Hierdoor ben je verzekerd van kwaliteit. Met een computer en een volautomatische snijtafel wordt de passe-partout met een mooie schuine rand (45°) op maat uitgesneden waardoor je een optisch diepte-effect krijgt. De schuin afgesneden rand aan de binnenkant (kern) is wit van kleur.

Dit passe-partout is ook liggend te gebruiken, dus ook geschikt als passe-partout voor een lijstmaat van 100x70cm en een fotomaat van 91,5x61cm.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 59417692845

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.4 ★★★★★
Based on 23 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
F
Verified Purchase
Fisherman337
Bozeman, US
★★★★★ 5
Great lights
Color: 2Pcs 18W LED Flood Light, Color: 2Pcs 18W LED Flood Light
Great product, the lights are crazy bright, I put them on a four wheeler and the lights are cheaply priced
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 17, 2026
A
Verified Purchase
Amazon Customer
Port Orchard, US
★★★★★ 5
Bright lights
Color: 2Pcs 18W LED Flood Light
Installed on my garden tractor , they work much better than the stock headlights, now I can see what's in front of me at night
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 10, 2026
P
Verified Purchase
P. Schmidt
Belleville, US
★★★★★ 4
Good quality, bright, good light projection pattern, good choice for snowblowers
Color: 2Pcs 18W LED Flood Light, Color: 2Pcs 18W LED Flood Light
This review is ONLY for the Nilight model 1260LM (the package of TWO of them). This product has a flexible design, allowing it to be used in a variety of ways when you want to add illumination to a vehicle of some kind. It can be used as add-on fog lamps for trucks and off-road vehicle, it can be used as headlights for golf carts and such, and it is a good choice for adding headlights to snowblowers. The two mounting brackets allow swiveling and angling up and down for best aim and illumination pattern. Each 'lamp' assembly is mostly made of black anodized or black powder-coated aluminum, with a water-resistant design. The front 'lens' is Lexan or some other suitable clear plastic material with good, durable properties. The manufacturer claims that the included mounting hardware (bolts, nuts, washers) are stainless steel, but they seem to weigh too little to be SOLID stainless. Whatever they are made from, they do not attract strong (neodymium) magnets. Because I bought the lamps to use on my snowblower, I decided to replace the included hardware with solid stainless hardware. The large bolts for mounting the brackets are M8 x 1.25 and the smaller bolts for attaching the lamps to the brackets are M6 x 1.0. I also chose to purchase the smaller bolts with 'cap head' bolts, because it make lamp angle adjustment much quicker and easier. Each included bolt comes with a flat washer and a split-ring lockwasher, and the large bolts also come with nuts (the smaller bolts thread directly into pre-tapped holes in the lamp bodies). The included lockwashers make sense for the main mounting bracket bolts, but there is no reasonable place to use the lockwashers of the smaller bolts. I inquired of Nilight tech support, and they clearly had never thought about WHERE those lockwashers should be used, and they concluded that they probably should NOT actually be used. Each lamp has a short (perhaps 6") 'pigtail' cable coming out of one rear edge, and these cables each have a pair of wires inside; a RED one for + and a BLACK one for - . The user can wire these up any way that is desired, but probably they will be wired in parallel in most situations. I wish that the cables were longer; as it is, it is necessary to splice them to other cables in places that will not be hidden from view and/or otherwise protected from the elements. These lamps are designed to operate on 12VDC power, although the exact voltage is not critical. There is no need to use a special LED power supply, since the lamps include their own internal power conditioning circuitry. Powering these from 12VDC, EACH lamp will required 1A of current, to 2A total when wired in parallel. This comes to 12V x 2A = 24 Watts. In my case, I needed to power the lamps from a cordless power tool battery which produces a nominal 20VDC, which can drop as low as about 16V. Accordingly, I used one of the ubiquitous and inexpensive "DC Converters" (aka "DC-DC Converter") with an input having a voltage range that includes the expected 16~20V of the battery, and has a regulated 12V output, and has a Power (Watts) rating of at least twice the expected load, in this case a 60W one from Amazon. Since these converters have nearly a 100% efficiency, the input and output power (Watts) will be the same value, 24W. Doing the math in my case, an assuming an average battery voltage of 18V, the math is 24W / 18V = 1.3A. My battery has an Amp-Hour (Ah) of 4, so 4 / 1.3 = about 3 hours of operating time for the two lamps from a fully charged battery. My only gripes with the product have already been mentioned: - overly short power cords - poorly conceived hardware 'package'; the smaller lockwasher are useless, and the associated bolts should have had cap heads instead of hex heads (I won't complain about the lack of sold stainless steel hardware, since that would have driven the selling price WAY up)
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 9, 2026
M
Verified Purchase
michael jones
Birmingham, US
★★★★★ 5
LOVE these LIGHTS !!!
Color: 2Pcs 18W LED Flood Light, Color: 2Pcs 18W LED Flood Light
i put 2 on the front of my 24" ariens snowthrower and it actually was to much !!! using one now and PLENTY of light !!! i have lots of dewalt batteries and i bought a adapter that allows me to put a battery in and has switch and fuse , wired to light and used one of my old 2AH batteries and it lasted 2.5 hours no problem , non stop . my newer batteries are 6 and 8 AH and last up to 8 hours before recharge . LOVE these LIGHTS !!! installing one on ladder rack on rear of truck . you know how many times that will be used on a late evening or early start so i can see to load or unload .
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 6, 2026
I
Verified Purchase
ITO
Houston, US
★★★★★ 5
Good bang for the buck.
Color: 2Pcs 18W LED Flood Light
I have bought 10 of these now. I put them on my work trailer and use them for reverse lights. They are cheap, easy to install, and they work very well. Now and then, I break one; they are exposed on my trailer and stuff happens, and these are so cheap it's not a big deal to replace them.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 15, 2026

recommand products

Casify Matte Hoesje met MagSafe voor de iPhone 15 Plus - Mat Zwart
16.99
Boogschutter Karikatuur | Fotolijst 21x30 cm
24.95
Casify Leren Hoesje met MagSafe voor de iPhone 16 Pro - Zwart
19.99
Casify Kickstand Hoesje met MagSafe voor de iPhone 14 Plus - Mat Zwart
17.99
Tenniser Karikatuur | Sleutelhanger
12.95