KTM BEARING PRESS TOOL 3D-PRINTED EVOIII

KTM BEARING PRESS TOOL 3D-PRINTED EVOIIIThese tools help to replace the bearings and sealings at your KTM Scarp Evo III frame. Please see below pictures how to use it. Never forget to use the washer between the screws, nuts and the printed parts. Instructions for the Print Yourself Tool (3D printer required): https: www. thingiverse. com thing: 6584122 *Disclaimer: We would like to kindly inform you that, as we have no control over the printing process, the printing and use of the parts is

These tools help to replace the bearings and sealings at your KTM Scarp
Evo III frame.

Please see below pictures how to use it. Never forget to use the washer
between the screws, nuts and the printed parts.

Instructions for the Print Yourself Tool (3D printer required):
https://www.thingiverse.com/thing:6584122
*Disclaimer:
We would like to kindly inform you that, as we have no control over the
printing process, the printing and use of the parts is at your own risk
and responsibility. Please note that parts may damage or destroy your
bike or other parts if printed incorrectly, which could potentially lead
to an accident. Therefore, we recommend that you only print the parts if
you have sufficient experience with printing materials and printing
processes to be able to assess the stability and durability of the
printed parts.

Therefore only replace the bearings by yourself, if you have sufficient
experience. Otherwise please contact your dealer.

Incorrectly installed bearings and damage caused by improper
installation can damage the bicycle or pose a danger to life!