Pay in installments of $64.50 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 15 - Jul 20
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Dual 8" Loaded Amplified High End Aluminum Subwoofer Enclosure 300 Watts RmsDS18 SQ82A 8" Amplified Car Audio Subwoofer plus 8" Passive Subwoofer in High End Aluminum Enclosure 1200 Watts Specially designed for vehicles that want to add great bass but have very little to no room for large subs and boxes. The SQ82A incorporate a 8 inch active subwoofer with an 8 inch passive woofer to help enrich the tone and bass levels in a compact enclosure that contains a special design to help extend and elaborate the bass for your music
DS18 SQ82A 8" Amplified Car Audio Subwoofer plus 8" Passive Subwoofer in High End Aluminum Enclosure 1200 Watts
Specially designed for vehicles that want to add great bass but have very little to no room for large subs and boxes.
The SQ82A incorporate a 8 inch active subwoofer with an 8 inch passive woofer to help enrich the tone and bass levels in a compact enclosure that contains a special design to help extend and elaborate the bass for your music with the built in amplifier!
The built in amp just needs power and then you have all the normal amplifier settings right at your fingertips including bass boost, gain control, and low pass filter settings. The included gain control knob will also let you adjust your music easily while on the go with a quick turn of the dial.
This small unit can fit behind most conventional car seating, rear cubby, or small sized storage compartments so you can have clear and vibrant bass even if you have no room.
The unit also comes with it's own volume control input so you can find the perfect bass level for your musical preferences. With 300w RMS and 1200w MAX power available on tap you will be sure to get hear vibes every time you hear the bass drop.
Highlights
- Add bass where there was none before easily! Compact design that is made to fit behind most front or rear seats or wherever there is room. The options are endless!
- Specially designed 8 inch active with 8 inch passive subwoofer made to maximize bass response in spaces that are not typically designed for subwoofers.
- Built in high power amplifier with bass remote input. High level inputs and RCA inputs will ensure this will work for any vehicle. 300w RMS 1200w max output has been engineered to power this compact subwoofer and enclosure to it's most optimal output.
Key Features
- Subwoofer
- 8 inch active + 8 inch passive subwoofer
- Max Power Handling: 1200 watts
- RMS Power Handling: 300 watts
- Frequency Response: 30-350Hz
- Voice Coil Diameter: 1.52"
- Voice Coil Material: Copper
- Impedance: 2-ohms
- Sensitivity: 83 dB
- Magnet Weight: 32 Oz
- Magnet Material: Ferrite
- Box:
- Box Material: Aluminum
- Box Tuning: 50Hz
- Box Type: Sealed / Passive
- Internal Volume: .38 ft3
- Dimensions: (LxWxH) 12x9x9"
- Amplifier:
- Digital Class D Monoblock
- Frequency Response: 30-350Hz
- Efficiency at 4-ohms: 75%
- Total Harmonic Distortion: <.5%
- Selectable X-Over: LPF Fixed
- Bass Boost: 0-12dB
- Phase: 0-180
- Power and Ground: 8 gauge
Good for:
Car Audio
Pro Audio
Home Solutions
DIY Projects
Technical Details
| GENERAL SPECIFICATIONS / ESPECIFICACIONES GENERALES: | |
| Speaker Type / Size/Tipo de Altavoz / Tamaño | 8” Active + 8“ Passive/ 203.2 mm + 203.2 mm /8” Activo + 8 “ Pasivo |
| Total Impedance/Impedancia Total | 2 Ohm |
| Total RMS Power Handling/Manejo de Potencia RMS Tota | 300W |
| Total MAX Power Handling/Manejo de Potencia MAX Total | 1200W |
| Sensitivity (1w/1m) /Sensibilidad (1w / 1m) | 83dB |
| Frequency Response/Respuesta de Frecuencia | 30-350Hz |
| SPEAKER SPECIFICATIONS / ESPECIFICACIONES DEL ALTAVOZ: | |
| Voice coil Diameter/DIametro de la Bobina de Voz | 1.52" / 38.6mm |
| Voice Coil Former Material/ Material Interior de Bobina Móvil | Aluminum/Aluminio |
| Winding Material/Material del Bobinado | Copper/Cobre |
| Cone Material/Material del Cono | Non-Press Cone/Papel sin Prensar |
| Dust Cap Material/Material de la tapa Antipolvo | Paper/Papel |
| Surround Material/Material de la Suspensión | Rubber/Caucho |
| Basket Material/Material de la Canasta | Steel/Acero |
| Magnet Material/Material de Imán | Ferrite/Ferrita |
| Magnet Weight/Peso de Imán | 32 Oz / 914 g |
| AMPLIFIER SPECIFICATIONS / ESPECIFICACIONES DEL AMPLIFICADOR: | |
| Amplifier Class/Clase de Amplificador | Class D/Clase D |
| Amplifier Type/Tipo de Amplificador | Subwoofer Monoblock/Monobloque para el Subwoofer |
| Number of Channels/Número de Canales | 1 |
| Minimum Impedance/Impedancia Mínima | 2 ohm |
| Signal to Noise Ratio/Relación Señal / Ruido | >80dB |
| Efficiency @ 4ohm/Eficiencia @4 Ohm | 75% |
| Total Harmonic Distortion (THD)/Distorsión Armónica Total (THD) | <0.5% |
| Low Level Input Range/Rango de Entrada de bajo nivel | 200mv - 6V |
| High Level Input/Entrada de Alto Nivel | 2-9V |
| Auto Turn-On /Encendido Automatico | Yes (Hi-Level Input)/Si (Entrada de Alto Nivel) |
| Selectable X-Over/X-Over Seleccionable | LPH Fixed/LPH Fijo |
| X-Over Filter Range/Rango de Filtros X-Over | 35-180Hz |
| Bass Boost Range/Rango de Refuerzo de Graves | 0-12dB |
| Bass Boost Frequency/Frecuencia de Refuerzo de Graves | 50Hz |
| Phase Selector/Selector de fase | 0°～180° |
| Led Indicator/Indicador LED. | Power / Protection/Encendido | Protección |
| Power Input Terminal Size/Tamaño del Terminal de entrada de alimentación | 8Ga |
| Fuse Size/Tamaño del Fusible | 30A |
| Remote Level Control/Control de Nivel Remoto | Yes (Dash Mount Included)/Si (Para montaje de Tablero Incluido) |
| Thermal Protection/Protección de Temperatura. | Yes (>75℃)/Si (>75℃) |
| DC Output Protection/Proteccion de Salida DC | Yes (>2V)/Si (>2V) |
| Short Circuit Output Protection/Protección de Salida de Corto Circuito | Yes/Si |
| Voltage Input Protection/Protección de entrada de Voltaje | Yes (>17vdc)/Si(>17vdc) |
| MEASUREMENT / MEDIDAS: | |
| Overall Height/Altura Total | 9" / 230mm |
| Overall Width/Ancho Total | 9" / 230mm |
| Overall Depth/Profundidad Tota | 12" / 304mm |
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.8 ★★★★★
Based on 24 reviews
Sort
Product Reviews
★★★★★ 4
Despite some caveats; this is a versatile hub
The Anker 555 8-in-1 USB-C Hub is a good buy if you’re looking for a hub from a reputable brand. I use it with an M1 Macbook Air, and it has been reliable so far. This hub has the following ports: 1 USB-C data port, 1 USB-C Power Delivery Port, 2 USB-A data ports, 1 HDMI port, an Ethernet port, and a microSD/SD card reader.
Charging, PD (Power Delivery):
To keep my Macbook charging, I connect a PD (Power Delivery) capable cable to the USB-C port meant for PD. (The other USB-C Port on this hub is meant only for data.) Once connected, the hub will eventually become warm to the touch, but this hasn’t caused any problems so far.
Video Performance - no problems in 1440p
I can connect my 1440p 144hz monitor to this hub’s HDMI port and my Macbook Air has no problem outputting a refresh speed of 144hz, as well the lower refresh rates of 120hz and 60hz. (I do not have a 4k monitor, so I could not test that.)
USB-A Ports - works flawlessly
I’ve tried keyboards, USB Drives, and even gaming Mice. All of these devices work as expected when connected to the USB-A Ports.
Ethernet - Excellent speed
I've connect this hub using an Ethernet cable to Gigabit speed Internet. The speed is just as fast as other computers on the network, and there is no slowdown at all, even with most of the ports on the hub being used.
Gaming Keyboards with USB-C connectors - some issues.
Some peripherals such as keyboards with USB-C connectors may not work on the USB-C ports on this hub. I tried using a Glorious GMMK Mechanical Keyboard and it did not work with this hub’s USB-C ports. (Of course you could try to simply use a USB-C to USB-A adaptor and then connect via the other USB ports on the hub instead.)
Extension Cable - Use a Thunderbolt 4 cable
Although this is totally optional, I like to use a small, 6-inch USB-C Extension cable to allow this hub to have more slack away from my laptop when connected. To allow this to work, I had to use a Thunderbolt 4 extension cable. I've tried other cables such as a Thunderbolt 3 extension cable. However, some of the attached devices on the hub were not recognized. Only the the Thunderbolt 4 extension cable allowed all my attached devices to be recognized.
Other devices
I have successfully connected an external SSD via the USB-C data port on this hub. I also regularly use an external DAC using the USB-A ports connecting to an IFI HIP DAC. Both of these devices work perfectly with this hub. Data transfer speed is rated at 10Gbs, though I haven't actually confirmed that. It works well enough for my purposes of transferring text documents and the occasional batch of vacation photos to my external SSD.
Conclusion
This hub from Anker is rated at 10Gbs which is plenty for me. But if you regularly transfer large amounts of data (like for video editing), I would instead recommend a powered docking station such as those from CalDigit. But for me, this portable hub does everything I need, and for much less money.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 28, 2023
★★★★★ 5
Almost perfect, could use one more USB-C Gen 2 port and a metal case instead of plastic.
Never really had any problems with Anker gear, I've come to trust the brand name. This little hub is almost perfect for use with my 2019 MacBook Pro, but where Anker really dropped the ball is by not adding one more USB-C port. I mean, there's two, but if one is dedicated to power devices only that doesn't really leave much room for expansion by only giving you one extra, I mean they were thoughtful enough to give you two USB-A ports. I do like that the USB-C and two USB-A ports are version 3.2 Gen 2 rated for up to 10Gbps transfer speeds versus Gen 1 at 5Gbps. The plastic casing does get hot, not sure if aluminum metal would be any better, but it would feel nicer, plastic just feels cheap. Also, a dark case with dark letter printing doesn't work because you can't see the writing, should have used lighter letter coloring. Otherwise, solid performer. I'll keep it along with my other one because having two hubs with a laptop is convenient so I don't have to always haul a hub around from place to place.
PROS:
• 1 USB-C port version 3.2 Gen 2 rated up to 10Gbps.
• 2 USB-A ports version 3.2 Gen 2 rated up to 10Gbps.
• Also includes, HDMI, Ethernet, SD and micro SD card ports.
CONS:
• Plastic casing, gets hot.
• Should have one more USB-C port.
• Port description lettering is too dark, gets lost against dark case color, should have used white or silver lettering instead.
• No audio port.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 7, 2024
★★★★★ 5
It WORKS! I'm Back at Work. Thx to Apple for support and Amazon for fast delivery
I am thrilled to report that the Anker USB C Hub with Ethernet fixed a dire problem that nailed me when I switched from my maybe-20 year old dying wired Apple Extended Keyboard to the Macally keyboard comparable (with USB-C connection). I have a 2023 MacBook Pro 14", a lovely workhorse, with 3 USB-C/Thunderbolt ports, a MagSafe power port and an HDMI port (with, it turned out, limited ability to handle UHD displays, so useless for my desk setup). It turned out my old Dockteck hub with ethernet didn't have thunderbolt capable USB-C ports, so my new MacAlly keyboard connected to that hub stopped working. On top of that, as I swapped with my Logi webcam, it also required a trickle of power the Dockteck hub didn't provide. As soon as I figured out what the issue was, I read up on several multiport adapters with ethernet, and it seemed that either I would be stuck purchasing WAY more than I needed, adding another bulky (annoying!) device on my desk surface and costing me close to $200. This seemed crazy, so I called Apple Store support. The only Apple Store multiport adapter was useless to me (and also $80) because, of all weird things, it had only ONE USB-C/Thunderbolt compatible port among 8--most ports were legacy. (Ugly too, just saying folks don't HAVE to make devices ugly!) The Apple Store rep, in one of those brilliant customer rep incidents, understood quickly the challenge, said Apple Store didn't have anything that would work for me, but SHE KNEW SOMEONE (ta-da! better than AI!) who would know and could recommend. Three minutes later she said this Anker device would work. I had it in hand by 6pm same day. So this is not just a rave for a solution that WORKS, but also a thank you to the great support from Apple to get me back to work fast. And Amazon for getting the item to me fast too!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 20, 2026
★★★★★ 5
Great as long as you know its limitations; runs warm; monitor settings may need to be changed
I reluctantly gave up MagSafe and joined the USB-C future when my employer issued me a new 2019 16" MacBook Pro. Searching for a way to connect my various peripherals I settled on this hub as a reasonable way to connect a 4K display, pass power from the laptop charger (albeit not the full 96W; macOS reports 79W after hub losses—good enough most of the time), connect 1GigE, and provide a few spare USB ports and occasionally-used SD card slots. I've learned a few things: A port that looks like USB-C does not pass video unless it is a "Thunderbolt" port (look for the lightning bolt logo, apparently); connecting a USB-C-to-mini-DisplayPort adapter to the USB-C port on this hub did not allow my monitor to work. Lesson learned. The HDMI port did work, and did pass 4K@60Hz, but only after I adjusted my monitor settings. At first I was convinced either my HDMI cable or this hub were defective, because macOS would only allow me to select 4K@30Hz. I have an LG 4K display, and from reading forums, one must enable 60Hz in the on-screen display menu before the monitor will tell the computer it is capable of displaying 60Hz video. For my monitor, that meant changing "Ratio" in "Quick Settings" to "Original" (it defaulted to "Wide", with a separate configuration for each port), as well as turning on "HDMI ULTRA HD Deep Color" from "Picture" -> "Picture Adjust." After I changed those two settings, 60Hz was not available until I unplugged the HDMI cable from the hub and plugged it in again. After that I had buttery smooth 4K video at 60Hz. The hub works as advertised, at least for my configuration. The 1GigE port works well, and is equivalent to a direct USB-C to Ethernet adapter I tried. It does run warm to the touch as other reviewers have reported. That's not problematic, but I'd prefer it pass the missing 17W to the laptop rather than dissipate it as heat. Time will tell how well the hub holds up, but for now I'm happy. In summary: if you have a new Mac this hub will likely work for you, though you may need to adjust your monitor settings.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 1, 2020
★★★★★ 4
Older flash drives might not work.
Port labels are too faint to read easily and the PD out port isn't labelled (I suppose they thought it was obvious since it has a fixed cable).
The USB ports are speedy except it won't recognize any of my several SanDisk Cruzer Glides. Others flash drives work okay.
Works great as an iPhone USB C to TV HDMI converter.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 23, 2026