Victron Smartsolar MPPT 100/15

Victron Smartsolar MPPT 100/15Battery Voltage: 12 24 Auto Select Rated Charge Current: 15A Nominal PV Power 12V: 220W Nominal PV Power 24V: 440W Max. PV Short Circuit Current: 15A Maximum PV Open Circuit Voltage: 100V Efficiency: 98% Charge Algorithm: Multi stage adaptive Data Communication Port: VE. Direct IP Rating: IP43 (electronic components) IP22 (connection area) Dimensions: H100 x W113 x D50mm Weight (kg): 0. 6 Warranty: 5 Years MPPT: Ultra Fast Maximum Power Point Tracking

• Battery Voltage: 12/24 Auto Select
• Rated Charge Current: 15A
• Nominal PV Power 12V: 220W
• Nominal PV Power 24V: 440W
• Max. PV Short Circuit Current: 15A
• Maximum PV Open Circuit Voltage: 100V
• Efficiency: 98%
• Charge Algorithm: Multi-stage adaptive
• Data Communication Port: VE.Direct
• IP Rating: IP43 (electronic components) IP22 (connection area)
• Dimensions: H100 x W113 x D50mm
• Weight (kg): 0.6
• Warranty: 5 Years

MPPT: Ultra Fast Maximum Power Point Tracking
By constantly monitoring the voltage and current output of your solar (PV) panels MPPT technology ensures that every drop of available power is rinsed out of your panels and harvested for storage. The advantage of this is most noticeable when the sky is partially clouded and light intensity is constantly changing.

Remote Monitoring and Control
Remotely control and monitor the extensive features of your SmartSolar MPPT charger with built-in bluetooth by pairing it with your smartphone or other device via VictronConnect. If your installation is connected to the internet Victron Remote Management Portal (VRM) provides access to the full power of your MPPT anytime anywhere; both services are free to use. For remote installations even when there is no internet connection or phone signal nearby you may be able to monitor your MPPT by bluetooth-pairing with a LoRaWAN (long-range wide area network) device available optionally.

Load output

The intelligent Load output function prevents damage caused by running batteries ˜flat. You can configure the voltage at which SmartSolar disconnects a load thereby preventing excessive drain on your batteries. And heres the clever bit: SmartSolar will attempt a 100% recharge every day. If it cant during periods of poor weather it raises the disconnect voltage daily until it achieves success. We call this feature BatteryLife because it maintains the health and extends the life of your battery.

Bluetooth Smart built-in

The wireless solution to set-up monitor update and synchronise SmartSolar Charge Controllers.

VE.Direct

For a wired data connection to a Color Control GX other GX products PC or other devices

Battery Life: intelligent battery management

When a solar charge controller is not able to recharge the battery to its full capacity within one day the result is often that the battery will continually be cycled between a ˜partially charged state and the ˜end of discharge state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months. The Battery Life algorithm will monitor the state of charge of the battery and if needed day by day slightly increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%. From that point onwards the load disconnect level will be modulated so that a nearly 100% recharge is achieved about once every week.

Internal temperature sensor

Compensates absorption and float charge voltage for temperature.

Optional external battery voltage and temperature sensing via Bluetooth

A Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature to one or more SmartSolar Charge Controllers.