Pay in installments of $837.50 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 19 - Jul 24
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Baumalight MP330 Tractor Brush MulcherKEY SPECIFICATIONS Compatibility: CAT 1 three point hitch tractors with PTO drive Path Width: 41. 75 inches Rotor Width: 30 inches Rotor Diameter: 15 inches at tool tips Maximum Engine Power: 40 HP Maximum PTO Power: 35 HP Minimum Engine Power: 15 HP Tooth Type: High speed carbide fixed teeth H3000 Number of Cutters: 36 Rotor Shaft Size: 2 inches Drive Speed: 540 RPM System Protection: Slip clutch Unit Weight: 525 lbs Application: Light brush and
KEY SPECIFICATIONS
● Compatibility: CAT 1 three point hitch tractors with PTO drive
● Path Width: 41.75 inches
● Rotor Width: 30 inches
● Rotor Diameter: 15 inches at tool tips
● Maximum Engine Power: 40 HP
● Maximum PTO Power: 35 HP
● Minimum Engine Power: 15 HP
● Tooth Type: High speed carbide fixed teeth H3000
● Number of Cutters: 36
● Rotor Shaft Size: 2 inches
● Drive Speed: 540 RPM
● System Protection: Slip clutch
● Unit Weight: 525 lbs
● Application: Light brush and heavy vegetation mulching for small tractors
| Model No. | MP330 |
|---|---|
| Path Width | 41.75" |
| Rotor Width | 30" |
| Maximum Engine HP | 40 |
| Maximum PTO HP | 35 |
| Minimum Engine HP | 15 |
| Cutting Depth | Level |
| Cutting Style | High Speed Teeth |
| Tooth Part Number | H3000 |
| Number of Cutters | 36 |
| Rotor Shaft Size | 2" |
| Rotor Diameter (tool tips) | 15" |
| Rotor Weight (with tools) | 188 lbs |
| Hitch Size | CAT 1 |
| Quick Hitch Compatibility | Yes |
| Drive Speed | 540 |
| Gearbox Spline Size | 1-3/8" |
| Tractor End Spline Size | 1-3/8" |
| System Protection | Slip Clutch |
| Unit Weight | 525 lbs |
| Hydraulic Requirements | Not Applicable |
MAXIMUM BRUSH CUTTING SIZES
| MODEL | TRACTOR SPEED | RPM | 25 HP |
|---|---|---|---|
| MP330 | Low Gear Slow Reverse | 1800 | 0.5" |
| MP330 | Low Gear Stop & Chew | 1800 | 1" |
| MP330 | Hydrostatic Slow Reverse | 1800 | 1.5" |
| MP330 | Hydrostatic Stop & Chew | 1800 | 2" |
| MODEL | TRACTOR SPEED | RPM | 30 HP |
|---|---|---|---|
| MP330 | Low Gear Slow Reverse | 1800 | 1" |
| MP330 | Low Gear Stop & Chew | 1800 | 1.5" |
| MP330 | Hydrostatic Slow Reverse | 1800 | 2" |
| MP330 | Hydrostatic Stop & Chew | 1800 | 3" |
| MODEL | TRACTOR SPEED | RPM | 40 HP |
|---|---|---|---|
| MP330 | Low Gear Slow Reverse | 1800 | 1.5" |
| MP330 | Low Gear Stop & Chew | 1800 | 2" |
| MP330 | Hydrostatic Slow Reverse | 1800 | 2.5" |
| MP330 | Hydrostatic Stop & Chew | 1800 | 4" |
| MODEL | TRACTOR SPEED | RPM | 55 HP |
|---|---|---|---|
| MP330 | Low Gear Slow Reverse | 1800 | 2" |
| MP330 | Low Gear Stop & Chew | 1800 | 2.5" |
| MP330 | Hydrostatic Slow Reverse | 1800 | 3" |
| MP330 | Hydrostatic Stop & Chew | 1800 | 5" |
BIG MULCHING PERFORMANCE FOR SMALL TRACTORS
The Baumalight MP330 is engineered for operators who want professional brush control without stepping up to oversized equipment. Designed specifically for small tractors, this lightweight fixed tooth mulcher gives you the confidence to clear overgrowth efficiently while maintaining smooth controlled operation that protects your machine and your land.
Imagine reclaiming trails, fence lines, and property edges with precision and ease. The MP330 lets you work slower and cut smarter, delivering clean mulching results that elevate your capability and reinforce your reputation for doing quality work with the right tools.
FEATURES & BENEFITS
- High Speed Carbide Teeth: Concave shaped carbide tips chip vegetation piece by piece, delivering aggressive cutting action while minimizing shock loads for smoother performance and longer tooth life.
- Rotatable Tooth Design: Each tooth provides three usable cutting edges that rotate easily, keeping a sharp edge in contact with material and reducing ongoing maintenance costs.
- Spiral Tooth Pattern: One tooth engages the brush at a time, ensuring smoother mulching action that reduces vibration and improves operator control.
- Slip Clutch Protection: Adjustable slip clutch disengages at preset torque levels, protecting the gearbox and driveline while matching the power of your tractor.
- Reinforced Belt Drive: Heavy duty reinforced belt efficiently transfers power from the gearbox to the rotor while absorbing impacts that protect internal components.
BUILT FOR SELF RELIANT OPERATORS
The MP330 is built using industry standard components and backed by Baumalight service and instructional videos that support right to repair. Locally available parts and durable construction keep downtime low and confidence high season after season.
CLEAR MORE WITH CONFIDENCE
Equip your tractor with the Baumalight MP330 and invest in compact mulching performance that protects your equipment, saves time, and delivers professional results every time you engage the PTO.
VIDEOS
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.6 ★★★★★
Based on 22 reviews
Sort
Product Reviews
★★★★★ 5
Made a big improvement in cabin noise—highly recommend
Model: SLH20025
Siless Hybrid made a huge difference in reducing noise in the floor of my truck cabin. In some areas, there was basically just bare sheet metal between the inside and outside, so adding this really helped the truck feel more solid and noticeably quieter on the road.
I used Kilmat on the doors, and honestly I wish I had used Siless Hybrid there too, but it was too late by the time I realized the difference. This material is very sticky, easy to cut, and simple to apply, which made the install pretty smooth.
Just a heads-up: the tacky side gets messy and will bond to clothing really easily, so be careful during installation. Overall, I’d definitely buy it again—great product with real results.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 2, 2025
★★★★★ 5
Very good product at a fair price
Model: SLH20025
Very good sound deadener and heat shield, it is a bit sticky to work with, but easy to shape and cut
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 19, 2026
★★★★★ 5
I wish I had Siless 20 years ago!!!
Model: SLH20025, Model: SLH20025
I have installed all kinds of insulation in vehicles over many years. I only needed to purchase 2 boxes to complete the entire interior siding of my 2025 chevy express, what a great value! I wanted to insulate my locksmith van for sound and heat. The sound reduction virtually eliminated the road noise. These panels also look amazing. It got up to 110F in the sun with the doors closed. After adding Siless insulation the temperature maxed out at 97F. That is a massive difference. Plus, I didn't even finish with the roof before testing. Siless Hybrid 3in1 was extremely easy to cut and adhere onto metal panels. I'm impressed with the quality of the individual panels and the adhesive is not toxic smelling compared to some others. My favorite thing about these panels is you can actually take them off and readjust them before they finally stick and they do not leave any black residue behind when you pull them up to adjust them. All I needed was a heat gun, knife and a roller to complete this job. The size of each panel is perfect, you can handle them with ease. I probably won't need your product again for a while, but when I do I will definitely be back.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 21, 2025
★★★★★ 5
Works well and is easy to install.
Model: SLH20025, Model: SLH20025
I was sound and heat insulating a generator bay in my class A RV so I did three tests before and during material application: I did a sound level test to see how effective the material was for my application, a "stickiness" test, and a flammability test. This was indoors on a dry 78°F day. From beginning to end, the entire process, including testing, took 5 hours to install 25 sqft or material in a very complex area. One hour for cleaning, 3 hours for installation, and 1 hour for test setup and testing.
Using a sound meter, I took before and after readings and determined that I reduced the sound level by 2.2 db (40% energy decrease) with a noticeable decrease in sound and frequency. The generator bay is located under the master bedroom in the aft portion of the coach. The sound went from a rattling, vibrating generator noise to a more tolerable low level rumble.
The material was easy to apply. I did some testing prior to application and determined that surface preparation is key. I cleaned my painted metal surface and then degreased with acetone and the material stuck well. Be careful and purposeful when you apply the material because once it was stuck to the metal, it was quite difficult to remove or reposition.
Since it was going to be installed into a gasoline powered generator bay located under our sleeping quarters, I did some flame testing to determine the level of risk. Although not highly flammable after installation, my testing revealed that the PE used will catch on fire under certain circumstances. In order to reduce the risk, I used aluminized duct tape to ensure that all the edges were sealed and the PE was not exposed to direct flame in the event of a fire. I also decided to install an automatic fire extinguisher as an added precaution. In all fairness there should be one installed in the generator bay anyway.
All in all, I am very satisfied with the product and the results. I have recommended this product to my other RV owner friends.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 13, 2025
★★★★★ 5
Great product. Best value i could find
Model: SLH20025
I'm using talk to text, so forgive any grammatical and spelling errors.
I ordered this product after doing a bit of research on sound dampening materials. I had been doing car stereo for quite some time since my teens. Itook a break for 20 years or so. I'm now 40 and back in the day there was dynamat. And that was about it. as irecently bought a new 2017 F350 crew cab. I wanted to put in a new stereo system and being that it was my dream truck. I was going to put in my dream stereo. But before I could do that, I needed to start with the sound deadening. I looked into today's leading product and found a company called resonx. Had taken their place as king of the hill in sound deadly. I researched their products and found the materials they were built from and Silas was the closest match at the best price I used Silas Max. First, then Silas 3 and 1 hybrid over that on all exterior panels. Then, on the interior panels. I used the 3 and 1 hybrid . on the floor I used Silas Max. Then, the 3 and 1 hybrid, then Silas liner over that the car is incredibly quiet . As far as sound dampening and deadening, it works very well for the money really can't beat it. Do your homework no How and where to apply it? And you really can't go wrong or about $400. I did. What would have cost me easily? Two thousand in other brands highly recommend the product prep work.Is everything do your homework?Do it right and you will be happy with this stuff
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 6, 2026