Pay in installments of $42.19 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 18 - Jul 23
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Nantucket Sinks Pro Series 15" Stainless Steel Bar Sink, ZR1815Nantucket Sinks Pro Series 15" Stainless Steel Bar Sink, ZR1815 This 90 degree cornered single bowl bar prep Rectangle sink provides additional space and a fresh modern industrial look for any kitchen remodel. Channel groves are at the bottom of the sink to divert water for proper drainage. At home in both traditional and modern kitchens, our Pro Series stainless sinks provide a lifetime of functionality. Fabricated from premium gauge T 304 stainless
Nantucket Sinks Pro Series 15" Stainless Steel Bar Sink, ZR1815
This 90 degree cornered single bowl bar/prep Rectangle sink provides additional space and a fresh modern industrial look for any kitchen remodel. Channel groves are at the bottom of the sink to divert water for proper drainage. At home in both traditional and modern kitchens, our Pro Series stainless sinks provide a lifetime of functionality. Fabricated from premium gauge T-304 stainless steel for maximum durability, the 10 inch deep basin easily accommodate dishes. Nantucket Sinks stainless steel sinks have thick rubber dampening pads to dampen sound. Our finishing process helps keep our stainless steel corrosion-resistant to rust and oxidation. The satin finish makes daily maintenance a simple rinse!
Following the trend for industrial style kitchens in the home, Nantucket answers the call with our Pro-Series sinks. All of these are high quality premium 16 gauge 304 stainless steel. From bar-prep to large and deep single bowls, all of these feature either small radius (SR) or zero radius (ZR) corners which create the modern styling that says I got this and create a can-do kitchen. All of our Pro-Series have rubber padding applied for noise reduction, and are insulated to reduce condensation and the basins bottom is beveled around the drain to whisk away water. Nantucket offers accessories to complete all our Pro-Series sinks; just the touch for the modern kitchen.
Please see our color disclaimer.
Features
- Exterior Dimensions: 15" x 18"
- Interior Dimensions: 13" x 16"
- This sink is crafted from 304 stainless steel in a lustrous satin finish
- Nantucket Sinks are sprayed with a special insulation to reduce condensation
- Rubber padding is applied for noise reduction
- Colander drain included
- 16 Gauge
- Limited Lifetime Warranty
- Drain: 3.5" Standard
Related Products
- Nantucket Sinks NS35LCC Flip Top Crumb Cup Inch Kitchen Drain
- Nantucket Sink 3.5 Inch Extended Flange Disposal Kitchen Drain in Brushed Stainless 3.5EDF-BRS
- Nantucket Sink Colander Kitchen Drain NS35CD
Details
| Bowl Split: | Single |
|---|---|
| Box Height: | 13" |
| Box Length: | 21" |
| Box Weight: | 20 lb(s) |
| Box Width: | 18" |
| Collection: | Pro Series |
| Color: | Silver |
| Country of Origin: | China |
| Drain Included?: | Yes |
| Drain Placement: | Center |
| Drain Size: | 3.5" |
| Finish: | Brushed Satin |
| Gauge: | 16 |
| Has Overflow?: | No |
| Inner Depth: | 10" |
| Inside Bowl Dimensions: | 13" x 16" |
| Installation Type: | Undermount |
| Item Height: | 10" |
| Item Length (Front to Back): | 18" |
| Item Weight: | 16.00 lb(s) |
| Item Width (Side to Side): | 15" |
| Material: | 304 Stainless Steel |
| Minimum Cabinet Size: | 21" |
| Number of Bowls: | 1 |
| Number of Faucet Holes: | 0 |
| Overall Dimensions: | 15" x 18" |
| Required Assembly: | Professional installation recommended |
| Room: | Bar |
| Shape: | Rectangle |
| Sku: | ZR1815 |
| Ship Method: | UPS |
Warranty
Nantucket Sinks Warranty Details (PDF)
Installation Instructions
Installation Instructions (PDF)
Product Specifications (PDF)
Product Care
Nantucket Sinks Product Care (PDF)
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.8 ★★★★★
Based on 27 reviews
Sort
Product Reviews
★★★★★ 5
Works
Size: 3 Panel-102'', Color: Beige, Size: 3 Panel-102'', Color: Beige
It’s beige and not white. Once install - hard to disinstall. Need a drill to put it together
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 4, 2026
★★★★★ 3
Does the job, but assembling by yourself is a nightmare
Size: 4 Panel-88'', Color: Black
Does it do the job? Yes, although as others said there are small gaps but it's not a huge deal. The price is also good. But the reason I'm giving it a 3/5 is simply because the assembly for this was a complete nightmare. I honestly don't think I would recommend this to anyone unless they have another person to help them assemble it, because doing it by myself was terrible. I don't think I'd buy this again, I think I'd opt to just spend a bit more money and save myself the trouble personally.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 29, 2026
★★★★★ 4
Reasonably adequate room divider
Size: 4 Panel-88'', Color: Beige
I'm reviewing this as I assemble it.
Couple things:
1. I didn't expect as much assembly. I've ordered dividers before and they more-or-less came as one unit. Sometimes the panels needed screwing together. These require complete assembly and come largely as three rods: two make up vertical columns and snap together. Another one (called part "C") makes the horizontal columns and you have two of these per panel (one attaches to part "A" and the other part "B"). These parts are metal with a plastic shim. Using the wood screws to attach to part "C" is a real pain in the neck. There's not much holding the panel in place so it's a little tricky.
One tactic I've found while I'm assembling that works for the initial connections from parts A and B to their respective "C" rods is to hold the screw in place with a screw driver and then rotating the rod around the screw. This will do a number on your hands if you aren't wearing gloves. This obviously doesn't work when completing the connection.
Using a driller driver on this is really near impossible because there isn't anything you can use to secure it in place. You can use it on the first panel, but as it gets longer, it becomes increasingly difficult and because it isn't wood, it's really tight. I considered drilling larger pilot holes but since there are only 4x4=16 screws I need to screw in, I just decided to use my screw driver to complete it.
2. Also related to assembly. When completing the panels (attaching parts "A" and "B" to parts "C" that have the cloth cover on it), you have to be careful that when you tighten that side that it isn't loosening the other side. Because the pilot holes are so tight, you can end up rotating the rod, which rotates it in the same direction as looser on the original side. Having someone hold the "C" rod in place while you screw it in is probably the easiest approach. I didn't have a 2nd person, so I just had to keep flipping back and forth and tightening both sides as I screwed it in. Not the worlds biggest deal, but annoying nonetheless.
3. The way the instructions are written, they seem to suggest building this thing progressively; that is, you do panel 1, then 2, connect them together, then do 3 and connect it, etc. I took a different route that I suspect saved me quite a bit of trouble, and I assembled all four panels first and THEN connected everything together.
4. For the love of God make sure you check that the plastic tip is on the same side for every panel. Otherwise, you have to take one side apart again and reverse it. On the bright side, if this happens, you've essentially bored out the pilot holes to be the correct size... which is having me question if I shouldn't have just bored them out to the appropriate width in the first place.
5. Attaching all of the panels together is also an enormous pain in the ass unless you happen to have an 88" long elevated surface. Attaching the legs either requires you to elevate one side, which will invariably twist the inexplicably cheap material in the bottom connectors... or you can attach them sideways... or you can put this thing upright, having two people hold the panels in place while you use the allen wrench to tighten the bolts on the underside. None of those are particularly great options.
NOW on to the utility itself.
1. The panels do let some light through (I didn't believe their advertising, and that was one of the reasons that I bought beige, is that I wanted it to not be too dark). They aren't transparent though, so it isn't that far off from their description. They functionally work great, and keep the mess of wires hidden and when I'm sitting at my desk, actually reflect quite a bit of light into my office. Great!
2. My wife has described these as "the most hideous piece of furniture ever conceived of by man." So it does not have spouse approval factor. Granted, she will seldom be in my office area, so that isn't the end of the world.
3. These are really hard to align in a way that doesn't look a little tacky. There are some plastic connectors but they don't do a bang up job of keeping these in place. Each panel is slightly tilted and it's... quite obvious. I may at some point make my own improvements to these to help make them more level. It's not a particularly expensive product so I wasn't expecting much so it's fine and I'm not going to ding them on the rating because of it.
All said, would I buy this product again? Probably not. It's assembly was ~90 minutes which is about 75 minutes longer than I was anticipating spending on this (not including the 5 minute writeup that I'm doing here). But am I going to return it? Also no, if for no other reason I'd be just as annoyed taking it apart and putting it in the original box to return it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 31, 2023
★★★★★ 5
Great product
Color: Black, Size: 4 Panel-88''
Literally exactly what I was needing
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 1, 2026
★★★★★ 5
It's good...
Color: Black, Size: 4 Panel-88'', Color: Black, Size: 4 Panel-88''
It's good....took about 45 minutes to put together. No issues. Looks great...made the wife happy....
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 14, 2026
recommand products
Steering King Pin Set RareParts 30425
185.46
Regular Fit Cat Mom Print Cotton T-Shirt
71.00
Injen 16-17 Lexus IS200T/RC200T 2.0L Polished Short Ram Air Intake w/ MR Technology
193.52
Doodle Heart Print Relax Fit Sweatshirt
112.00
Innovate Extended Bung/Plug Kit (Mild Steel) 1 inch Tall (Incl; with all AFR kits)
25.23