SKU: 71465609780

Edelbrock Performer 460 w/ O EGR Manifold

Sale price$244.80 Regular price$272.00
Save 10%

Pay in installments of $68.00 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 23 - Jul 28

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Edelbrock Performer 460 w/ O EGR ManifoldEdelbrock part #2166 Performer 460 intake manifold is designed for street 429 460 c. i. d. Ford V8's. Will not fit 429 Cobra Jets or 1966 68 462 Lincolns and will not accept stock spread bore carb. Will not fit 1988 and later models. Edelbrock's Patented Dual plane, low rise design with a 180 degree firing order greatly improves torque over a wide rpm range for excellent throttle response from off idle through 5500rpm. This Performer intake manifold

Edelbrock part #2166 Performer 460 intake manifold is designed for street 429/460 c.i.d. Ford V8's. Will not fit 429 Cobra-Jets or 1966-68 462 Lincolns and will not accept stock spread-bore carb. Will not fit 1988 and later models. Edelbrock's Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response from off-idle through 5500rpm. This Performer intake manifold is ideal for passenger cars, trucks, 4x4s, tow vehicles and RVs. Must use stock OE EGR plate!

  • Accepts Exhaust Heated Chokes

This Part Fits:

Year Make Model Submodel
1969-1974 Ford Country Sedan Base
1969-1974 Ford Country Squire Base
1969-1972 Ford Custom Base
1969-1976 Ford Custom 500 Base
1975-1976 Ford Elite Base
1969-1974 Ford Galaxie 500 Base
1969-1970 Ford Galaxie 500 XL
1972-1976 Ford Gran Torino Base
1974-1976 Ford Gran Torino Brougham
1974-1975 Ford Gran Torino Elite
1972-1975 Ford Gran Torino Sport
1972-1976 Ford Gran Torino Squire
1969-1978 Ford LTD Base
1970-1976 Ford LTD Brougham
1975-1978 Ford LTD Country Squire
1975-1978 Ford LTD Landau
1969-1974 Ford Ranch Wagon Base
1970-1977 Ford Ranchero 500
1970-1971 Ford Ranchero Base
1970-1977 Ford Ranchero GT
1970-1976 Ford Ranchero Squire
1968-1976 Ford Thunderbird Base
1971 Ford Torino 500
1970-1976 Ford Torino Base
1970-1971 Ford Torino Brougham
1970-1971 Ford Torino Cobra
1970-1971 Ford Torino GT
1970-1971 Ford Torino Squire
1968-1972 Lincoln Continental Base
1968-1971 Lincoln Mark III Base
1972 Lincoln Mark IV Base
1969-1972 Mercury Colony Park Base
1969-1970 Mercury Marauder Base
1969-1970 Mercury Marauder X-100
1969-1972 Mercury Marquis Base
1969-1972 Mercury Marquis Brougham
1970,1972 Mercury Montego Base
1972 Mercury Montego GT
1970,1972 Mercury Montego MX
1970,1972 Mercury Montego MX Brougham
1970,1972 Mercury Montego Villager
1969-1972 Mercury Monterey Base
1969-1972 Mercury Monterey Custom
Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 71465609780

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.7 ★★★★★
Based on 28 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
T
Verified Purchase
Troy Amhaz
Phoenix, US
★★★★★ 5
Must for subwoofers. True 2mm spec. High quality.
Model: 36 SqFt(3.4 SqM), Model: 36 SqFt(3.4 SqM)
Let me start of by saying WOW! This made a huge difference in the SQ of my L7S pushing 930w rms. Before I had major rattles in my 2020 Honda Civic SI. Taking the time to do this to my trunk and Lid made me realize just how loud my subwoofer actually is. It literally eliminated the rattles throughout my whole car. I still plan on doing this to my doors and rear deck but once I upgrade the speakers. I still have half of the box just doing the trunk and lid so 1 box of 36sf will be enough for most of the areas that need to get done. You may need a little more overall. This is true 2mm spec. Very sticky and easy to apply. It just take time to finish the work correctly and roll it down. It is not as heavy as I thought it was going to be. The size of the sheets are perfect for what you need to do. The value is on point for the quality. It does not rip very easily but you can cut it to size without any problems. Again, This is a must buy for anyone who is pushing 1000w rms or more.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 29, 2025
C
Verified Purchase
Craigdog
Port Orchard, US
★★★★★ 5
Quality product you
Model: 18 SqFt(1.7 SqM), Model: 18 SqFt(1.7 SqM)
Summary: Great quality product, priced right. Cuts and installs easy-follow the instructions people!! PRO TIP-you don’t need to cover every square inch. OVERKILL!! Think about it-when a bell rings you could put your fingers on the edge and silence it right? Same rules apply here. A strip or square will isolate the vibration and notice when placed correctly— knock on the surface and see what vibrates or what part makes the loudest drowning and that’s a good clue of where you should put a piece of this…unless you’re trying to use it for temperature insulation no need to go ape on it. If you look at the bottom of a stainless steel sink, it’s got a stripe or a small sticker of insulation that keeps it from rattling. You can do that here. What’s important to note is the instruction specifically say use a roller to roll the ribs out until it’s smooth that way you’ve got maximum adhesion. I see a lot of pictures and videos from people that finished their install and didn’t follow this simple instruction. It makes sure that it’s stuck down before you put all your paneling and carpet back in and it’s a small step with a cheap wooden roller it’s easy. I’ll say the installation with this product is a breeze. You can use sharp scissors or a blade. It does get gummy after a while, and you may need to clean off your blade or your scissors, but it cuts very well and the ribs make it easy to size in space the thickness is fantastic and the backing paper comes off quite easily. I’ve done lots of installations with Graphics emblems you name it and this product is very easy to use and represents good value.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 30, 2026
S
Verified Purchase
Shopper
Alexandria, US
★★★★★ 5
Good stuff !
Model: 36 SqFt(3.4 SqM), Model: 36 SqFt(3.4 SqM)
This is an excellent product. Easily moldable, cuttable with good scissors or razor knife, very sticky, works great. This pack was enough to do all 4 doors on a crew max truck, and I went wild on the fronts. I used 9 peices on each rear door which was just enough, and the rest on the fronts. I doubled up layers and even used some on the back of the door panels. If you follow the instructions and dont go wild you might even have extra left over. It works just like you would imagine. Without doing the entire cab there will still be road noise but this helped noise, better audio, no buzzing door panels, terrific improvement. It is kind of heavy, so extra weight is added to truck, but that really isnt a bad thing. It is noticable but in a good way. Get it. Use it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 20, 2026
O
Verified Purchase
Odin M Turner
Louisville, US
★★★★★ 4
Good product
Model: 36 SqFt(3.4 SqM)
Easy to roll out. Works great  Why did you pick this product vs others?: Fair price for the amount of coverage, good quality  Works well: Easy to install, rolls out great. Forms to contours well
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 13, 2025
B
Verified Purchase
BRIAN HEATH
Houston, US
★★★★★ 5
Great product
Model: 36 SqFt(3.4 SqM)
I used this on the doors of a Toyota Tacoma, worked as it described. Reduced the road noise significantly.. Need to buy another box for the floor and roof of the truck..
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 15, 2026

recommand products