Pay in installments of $53.75 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 20 - Jul 25
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
EAGO Porcelain, White, WD332 Round Modern Wall Mount Dual Flush Toilet BowlEAGO Porcelain, White, WD332 Round Modern Wall Mount Dual Flush Toilet Bowl The Factory was founded in 1996, EAGO Sanitary Ware Co has grown into a large scale sanitary ware manufacturer. After becoming very popular in Europe and Asia, EAGO's products have become available in the USA as of 2009. EAGO is determined to supply the best high quality bathtubs, toilets and sinks for people around the world. Living the Green Life. This toilet bowl will save
EAGO Porcelain, White, WD332 Round Modern Wall Mount Dual Flush Toilet Bowl
The Factory was founded in 1996, EAGO Sanitary Ware Co has grown into a large scale sanitary ware manufacturer. After becoming very popular in Europe and Asia, EAGO's products have become available in the USA as of 2009. EAGO is determined to supply the best high-quality bathtubs, toilets and sinks for people around the world.
Living the Green Life. This toilet bowl will save a family of four an average of 10,000 gallons of water per year!
THE FUTURE OF AMERICAN TOILETS Ultra Low Flush (ULF) Eco-Friendly 1.6 Gallon full tank flush. ADA Compliant. Can be installed at the height of your choice, install it so that the seat height is over 17" from the floor for ADA compliance. One Piece Toilet. Enjoy a sleek solid European design. Not only does it look so much better than your old toilet, it also works a whole lot better. Sleek Wall Mounted Look. Mounts to the wall leaving your floor space completely free, providing a functional benefit while offering a unique and stylish look to your bathroom. Fully Glazed inside & out. The trap ways of EAGO toilets are perfectly glazed just as they are on the outer surface. Keeping your toilet flushing like new for years. Living the Green Life. This environmentally friendly toilet will save a family of four an average of 10,000 gallons of water per year! Soft Closing Toilet Seat & Lid Included. Never be startled again by the loud crash of a slamming toilet seat. The soft drop seat has an innovative hinge system that will gently guide the toilet seat down with out a sound.
Please see our color disclaimer.
Features
- Required to be used with in wall tank carrier model PWG380 by EAGO. Tank sold separately.
- Water supply line hose not included.
- Enjoy a sleek solid European design. Not only does it look so much better than your old toilet, it also works a whole lot better.
- Sleek Wall Mounted Look. Mounts to the wall leaving your floor space completely free, providing a functional benefit while offering a unique and stylish look to your bathroom.
- Fully Glazed inside & out. The trap ways of EAGO toilets are perfectly glazed just as they are on the outer surface. Keeping your toilet flushing like new for years.
- Soft Closing Toilet Seat & Lid Included. Never be startled again by the loud crash of a slamming toilet seat. The soft drop seat has an innovative hinge system that will gently guide the toilet seat down with out a sound.
Details
| ADA Compliant?: | Yes |
|---|---|
| ASIN: | B004A0OBOC |
| Box Height: | 19.29" |
| Box Length: | 24.41" |
| Box Weight: | 68 lb(s) |
| Box Width: | 20.87" |
| Color: | White |
| Concealed Trapway?: | Yes |
| Configuration: | Bowl Only |
| Country of Origin: | China |
| Dual Flush?: | Yes |
| Eco-Friendly?: | Yes |
| Finish: | White |
| Flush Type: | Dual Flush |
| Flushing Lever Location: | Wall |
| Flushing Mechanism: | Assisted Flush |
| Flushing Technology: | Dual Flush |
| Flushing Trap Size: | 2 |
| Flushing Valve Size: | 3 |
| Gallons Per Flush: | 1.1 / 1.6 |
| Glazed Trapway?: | Yes |
| Harmonized System Code: | 6910.10.0010 |
| Includes Seat?: | Yes |
| Installation Type: | Wall Mount |
| Item Height: | 15.75" |
| Item Length (Front to Back): | 21.88" |
| Item Weight: | 61 lb(s) |
| Item Width (Side to Side): | 15" |
| Low Profile?: | Yes |
| Lowest Gallons Per Flush: | 1.1 |
| MaP Performance Rating: | Not Rated |
| Material: | Porcelain |
| NMFC Code: | 158880 |
| Outlet Location: | Rear Outlet |
| Overall Dimensions: | 21.88" x 15" x 15.75" |
| Pack Quantity: | 1 |
| Room: | Bathroom |
| Rough In Size: | 12 |
| SKU: | WD332 |
| Seat Bolt Spread: | 6.1 |
| Seat Height: | 15.75 |
| Seat Material: | Plastic |
| Seat Shape: | Elongated |
| Seat Type: | Closed |
| Shape: | Elongated |
| Ship Girth: | 98 |
| Ship Length: | 30 |
| Ship Method: | Small Parcel |
| Ship Package Type: | Carton |
| Ship Weight: | 79 |
| Ship Width: | 25 |
| Shipping Dimensions: | 30 x 25 x 24 |
| Ships From: | KS |
| Skirted?: | Yes |
| Soft Close Seat?: | Yes |
| Spud Placement: | Rear |
| Spud Size: | 0.5 |
| Style: | Modern |
| Toilet Seat Length: | 17.25 |
| Toilet Seat Type: | Two-Piece |
| Toilet Seat Width: | 14.5 |
Warranty
5 year limited warranty on all porcelain parts against fading/staining of the glaze & 1 Year on all parts
Eago Warranty Details (PDF)
Installation Instructions
Installation Instructions (PDF)
Product Specifications (PDF)
Video(s)
Product Video 1
Product Video 2
Related Products
Toilet Seat(s):
- EAGO Plastic, White, R-332SEAT Replacement Soft Closing Toilet Seat for WD332
Other(s):
- EAGO Plastic, White, R-332SEAT Replacement Soft Closing Toilet Seat for WD332
- EAGO Porcelain, WD390 White Modern Ceramic Wall Mounted Toilet Bowl
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.5 ★★★★★
Based on 19 reviews
Sort
Product Reviews
★★★★★ 1
Quality Control Issues
I want to like this dock, I really do. I purchased it with the intention of using it as a hub for my phone + usb-c external display.
The pass-through charging never worked on this dock. Tried multiple cords and tested the dock with nothing plugged into any of the USB ports -- all of the power disappears somewhere onto the hub and the actual charge rate on my phone slows to a trickle. With nothing connected, it estimates >24hrs to charge from 30% to full.
The plus side is that the usb ports do work, though the usb-c display went from 100% reliability to <50% within a few months of purchase. Extremely frustrating.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 24, 2024
★★★★★ 5
This is the one, buy it for DeX!
Looking for a compact USB hub to connect your laptop or Samsung DeX capable device? Buy this one!
I've tried multiple similar items from name brands, and they work fine as a USB and port hub, but this one is able to support power delivery and display data through a single (capable) USB-c cable. I assume because it is noted to be capable of some combo of USB 3.2, PD 3.0 pass through and DP 1.4 alt mode. I'm not quite sure which one(s) make it possible, but it works for an HP Spectre laptop and Galaxy phone.
Only improvement suggestion is to add an additional 10gb capable USB-C port in place of the three USB-A ports, but that's being super picky.
Thanks StarTech for building another unique solution for connectivity challenges.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 16, 2025
★★★★★ 2
Usb-c passthrough started failing about a year into ownership.
This had the potential to be the perfect accessory for my M4 MacBook Air. It is very difficult to find dongles like this that support display passthrough via usb-c (meaning that if you have a usb-c display you can connect it to this and use the display). When it did work, I was able to power a triple monitor setup with my 2 port Macbook Air (with one display being driven by a displaylink adapter).
If this product had continued to work as advertised, is would be a 5 star review.
But after maybe a year of VERY sporadic use (I use this maybe once a week because my MacBook Air is not often docked) the usb-c passthrough is already failing. On a display I use every day with a different machine (a 16" MBP that has enough ports to not need any adapters) and the display and cable work perfectly fine there so I can only assume that it is this specific adapter which is failing. If I insert the connector several times, sometimes I can get it to work but my success rate just keeps dropping. There was no other reason to spend this much on an adapter that without usb-c passthrough offers just 3 usb-a ports like most much cheaper adapters. So to say I am disappointed is an understatement.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 30, 2026
★★★★★ 4
Expensive, but it works
The good parts:
Yup, this works with DP alt mode, single cable use works for most devices I tried (steam deck, laptop, odin mini 2) even without the hub powered through the power in on the hub, I even got it working without external power to either the hub or my small usb-c monitor. However, some devices like my phone likely didn't give enough power for it to work without another power source. On my phone it worked for some usb devices without external power, but the dp alt mode didn't do work. DP alt on my phone works just fine with external power connected to the hub. Powering it with a small but powerful power bank worked fine, but lower power power banks might not keep up especially if the monitor isn't getting it's own power. It only takes a watt or two of power for the hub itself from some quick and dirty measurements charging my laptop through the pd-in on the hub.
As for the rest of it, the three usb 3 ports means you should be enough to get by for any use case, though you may need more dongles or adapters to get the type of connections you need, but quite usable as-is for a lot of purposes.
Basically it does what it says, there really is no other hub currently that can do pd alt mode, only big docks which need power supplies.
The ok parts:
*When it isn't powered* I noticed that with a monitor already plugged in, plugging it into a device would lead to the monitor not being initialized. But plugging the hub into the device first before connecting the monitor worked. No issue when it was powered. You can use this to get display out and charge with a Nintendo switch, but if it's not powered through the pd-in it probably wont switch to TV mode and output video, not sure if that's because of power or software reasons.
This is a nitpick, but if you care about the feel or aesthetic it's noticeably bland. The case is plastic and there seems to be no weighting on the inside, it's very light, which can feel cheap but it's not like adding weights would functionally make it better, the case also has a bit of a harsh feeling where it's joined, but it does feel solid and durable enough. It's clearly function over form, just barely meets the minimum bar imo.
The bad part:
You already saw, but the price is a bit steep for a hub (at $80). I'd love to see it at 60 or even 40 instead, I hope more similar hubs pop up for competition.
In summary:
It does what it says, if you know you want this and what it is then get it, I feel like it shouldn't cost this much, but it's quite usable and for now it's the only option for a DP alt mode hub.
Minus a half star each for subpar presentation and price 4/5
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 4, 2024
★★★★★ 5
Great for AR Glasses
This USB hub has been great for me! It's taken me so long to finally find a stable setup to allow using my XREAL Air glasses, peripherals, and charger at the same time. I've used this both with my phone and ROG Ally and I have not once had a problem. I even found that my ROG Ally manages to get the full supported PD of 65W, as long as I power the hub with a 100W PD charger. That said though, using a 65W PD charger is still more than adequate to charge the device while using various peripherals and a USB-C display.
Previously I used USB-C hubs with HDMI out and another device to merge the HDMI output with a USB-A connection into a single USB-C cable that I use for my AR glasses. This setup worked, but would increasingly stutter/freeze the longer I used it forcing me to constantly unplug and re-plug it in. In trying to find a solution that didn't split and merge back the display signal with USB data/power, this hub was the only one I found that wasn't thunderbolt 3/4.
I will say that I wish the cable to the host device was either longer and less rigid, or shorter with an optional extension cable. An ethernet port would have also been nice, but using up one of the USB-A ports with a USB ethernet adapter works if needed. Plus, if I wanted ethernet with it, then a dock would probably have been a better option over a hub anyway.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 29, 2023