APEX EC-7 | 19" x 9" ET30 | 5x120mm | 72.56mmAPEX Race Parts designs and manufactures high performance, flow formed and forged wheels for a growing list of vehicle makes. They are constantly expanding their product line with new wheel designs, wheel accessories and other performance and race parts. It is their mission to produce and distribute high quality performance parts that meet the demands of racing and street performance enthusiasts. FOR WHEEL FITMENT GUIDE https: apexwheels. com fitment
APEX Race Parts designs and manufactures high performance, flow-formed and forged wheels for a growing list of vehicle makes. They are constantly expanding their product line with new wheel designs, wheel accessories and other performance and race parts. It is their mission to produce and distribute high-quality performance parts that meet the demands of racing and street performance enthusiasts.
ModelEC-7 Wheel QuantitySold Individually Wheel Diameter19" Wheel Width9.0" OffsetET30 Bolt Pattern5x120mm Centre Bore72.56mm Load Rating1,650lbs Weight~22.3lbs (10.11kg) Face ProfileProfile 2; medium concavity Wheel ConstructionFlow Formed
A FITMENT FOR YOU
Need help selecting the proper wheel fitment for your BMW? APEX Race Parts have tirelessly test-fitted hundreds of setup combinations in order to provide direct-fit, spacer-free wheel packages for everything from showroom-fresh cars to all-out race builds. Their detailed fitment guides help you avoid costly trial-and-error and walk you through every step of finding your perfect setup.
Fit Matters
Fit Matters The right solution for every application
An optimized car setup begins with the perfect wheel and tyre fitment. Without model-specific attention to each wheels specifications, maximum performance is compromised. Each size was selected to find the right balance between a clean fit and the most grip possible. The EC-7’s wide range of widths, diameters, offsets and face profiles result in unique fitments ranging from 8.5" to 10.5" wide. Each wheel combines these features to meet the different brake caliper, strut, and fender clearance needs of each BMW model. Most vehicle models have options for wheels that range from direct-fit to aggressive for specialty applications.
Face Profile One design, many levels of beauty
The EC-7 wheel is available in three increasingly-concave face profiles; The shallowest face provides increased caliper clearance on narrow applications, while the deepest concave face reduces weight and creates a stunningly aggressive appearance on low offset and wide-width applications.
Spokes More than just a pretty face
The curved spokes of the EC-7 serve many purposes, both in terms of form and function. The split "Y" spokes were carefully evaluated from every aspect to ensure light weight and remarkable strength. Their curved design increases brake calipers in almost every application, allowing the EC-7 to fit where the ARC-8 design simply cannot. The unique curvature of each face profile reduces centre pad material as they are optimally selected for each unique width and offset. The lack of a deep front lip and spokes that connect directly to the barrel's lip, producing a rigid wheel with even load distribution.
Brake Clearance A lot of room in a tight space
Spoke clearance is only half the problem. The barrel construction on a wheel also needs to be big enough to clear the sides of your caliper and rotor. Many aftermarket wheels that have aesthetic compromises in their design may work with smaller stock brakes, or smaller diameter big brake kits, but the larger kits will pose a major problem. The barrel of the EC-7 wheel offers unmatched caliper clearance because wheels shouldn’t limit your choice of aftermarket brake kits, and brake kits shouldn’t force you to run oversized wheels. APEX 2D modelled most Big Brake Kits available in Solidworks and tweaked the wheel design of the EC-7 prior to production in order to fit as many kits as possible.
Hub Centre Easy to access lugs
Race wheels can't just be light, they need to function in a high performance environment. Unlike the narrow lug recesses of most other wheels, the EC-7 wheel features a wide open hub centre that easily accommodates oversized race lugs and beefy impact sockets. This allows for quick and easy wheel changes and prevents chips and scratches from tools.
Hub Centric No rings or adapters here
All APEX EC-7 wheels are purpose built for select vehicle applications, and hub locating rings are never required for any BMW application. All 5x120mm bolt pattern wheels feature a direct-fit, 72.56mm centre bore.
Centre Cap A factory fit and finish
APEX don't reuse one cap design for all of their wheels. Every EC-7 wheel is designed to work with factory centre caps. You can easily replace APEX centre caps with OEM roundels for a clean factory look. The EC-7 wheels will ship with the APEX Gloss Black centre cap that mimics the size and shape of a BMW factory centre cap.
Wheel Hardware Original or Aftermarket, it all works
The EC-7 wheel can be used with all OEM and aftermarket mounting hardware with a 60° tapered seat. Lug bolts, wheel locks, and stud conversion kits all work perfectly. The EC-7 wheel also accepts wheel spacers without issue. The shallow rear chamfer allows the wheel to remain hub centric even when 5mm flat spacers are used. The chamfer is deep enough to clear the chamfered lip found on some aftermarket spacers that would typically cause improper seating of the wheel and, therefore, wheel vibration.
TPMS Sensors They all fit
TPMS sensors, which monitor tyre pressure, are one piece of technology that can't be compromised. The attention to OEM compatibility on the EC-7 wheel doesn't end with centre caps. All APEX wheels accept OEM and aftermarket equivalent TPMS sensors, and any standard sized metal or rubber valve stem.
THE APEX STANDARD
Flow Forming Benefits of forging, without the pain
These APEX wheels are produced using a manufacturing process known as flow forming. This process significantly reduces weight in the barrel, which has the greatest impact on rotational mass. During the manufacturing process, rollers apply high pressure to the inner barrel, compressing the aluminium into its final shape. This effectively eliminates porosity and aligns the grain structure of the metal, which increases tensile strength. The end result is a lightweight and extremely strong barrel that equals that of a traditional forged wheel at a fraction of the cost.
Testing & Certifications Verifiable 3rd party testing
Many companies promote their wheels as being certified by the VIA when they actually aren’t. That’s like using the USDA logo on food without permission. APEX wheels get officially tested and registered by the VIA in Japan, and they have the proof to back it up.
Japan’s JWL is a commonly followed standard for wheel load ratings. The APEX flow formed wheels meet, and most exceed, their load rating requirements. Most manufacturers only meet the minimum while some don’t even do that. Check and verify load ratings before you buy.
Weight & Strength Optimization It’s all in the details
Various design features were implemented to ensure that the EC-7 wheel design was light, but had even more strength to handle the abuses experienced in endurance racing. APEX began with a beefy, multi-spoke, one-piece design. They then added reliefs in the mounting pad to remove weight between lug holes, where they could safely save weight. The design was then run through Finite Element Analysis (FEA) to further optimize the spoke and barrel design. The result is a lightweight wheel with extra strength in all the right places. Use the EC-7 with confidence. It’s over built for both street and track.
Finishes Because being faster is just not enough
The EC-7 wheel is available in multiple finishes. All APEX wheels are finished using a comprehensive multi-stage liquid paint system over a powder coated base coat. Standard finishes include gloss-metallic finishes, and semi-gloss or matte finishes.
Often overlooked, painted or powder coated lug hole seats can cause hardware to loosen or begin the spread of paint chipping to more visible sections. The coating process of the EC-7 leaves lug holes, centre bores and mounting pads untouched, which ensures proper fit and torque values.
Lifetime Warranty A wheel you can depend on
As of recent, all APEX wheels now come with a lifetime structural warranty and 1 year finish warranty, so you can be confident in your purchase. Please contact us for the full terms and conditions.
Models
1 Series / E82 / E88 (2007-2013) / 1 Series M (1M)
Color: Lux Alpha Black, Size: Rechargeable Z1 Motor Max
I am really pleased with this frother! Frothers I have used in the past didn’t mix my decaf coffee, 2% milk, and MCT oil as thoroughly as I like (oil and coffee separated). This frother blends everything AND I get a nice layer of frothy milk on top!!! Charge lasts a long and the froth can be submerged all the way up to the button!!!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 5, 2026
J
Verified Purchase
JMB
Alexandria, US
★★★★★ 5
Mixes my protein shake powder
Color: Blue
My husband and I both drink protein shakes daily. We have vortex mixers that work great, but they are plastic and getting old, and really needed to be replaced.
In an effort to reduce microplastics in our lives, I am trying to use less plastic mixing cups. I couldn't find anything small enough (other than regular blenders) with glass and metal parts that would work well for us.
During my search on here, several frothers showed up. This one caught my eye because of the amount of sales, quick delivery, and of course, decent pricing. Some of the reviews had me a little skeptical, and time will tell regarding the longevity, but so far I am pleased.
My protein powders are on the heavy side, but this little frother really gets the job done. Instead of having to use separate mixing cups (saving me on dishwashing), I just use my morning coffee cup (it's big enough) to mix my protein shake in. My husband just uses a regular glass.
Neither of us can believe the power this little thing has. We are getting smooth shakes!
Here is what I really like about it: It is powerful and mixes well; the frother is metal and not plastic; it cleans extremely easy; after making several shakes the battery has not died; can be used in glasses, coffee cups, even disposable cups (when we buy donut shop coffee); and I love the little stand which takes up barely any counter space. Less plastic, less clean-up, dependable (so far), and small, making it convenient even for travel.
I'm really glad I got this, and hope it will last. One last thing, do not turn it on while cleaning under running water. (Yes, you can laugh.)
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 20, 2026
D
Verified Purchase
David A.
Boise, US
★★★★★ 5
Powerful frother with a long rechargeable battery life
Color: Black
After purchasing three of the battery operated frothers. I finally found this amazing frother. It is very powerful so you do have to be careful not to slosh liquid out of your cup when you’re using it. But I have found it helps if you rotate the frother in a stirring motion while you are using it. That really helps keep the liquid from overflowing out of the cup. It has a sleek design and is rechargeable and the charge less about two weeks.I love this one so much. I take it with me when I travel. I actually left my original one at my mother’s house the last time I visited her and have ordered another one for my house. Highly recommend.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 27, 2026
M
Verified Purchase
MJFinds
Lake Worth, US
★★★★★ 5
Great Power and Creamy Foam
Color: White
This frother is amazing and has really good power. It creates creamy, smooth foam in seconds and works perfectly for iced lattes, cappuccinos, and matcha. I love that it’s rechargeable and lightweight, but still feels strong and high quality.
As someone who loves coffee, this has become one of my favorite tools for making café-style drinks at home. Easy to use, easy to clean, and looks beautiful on my coffee station.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 20, 2026
D
Verified Purchase
Desert hiker
Fort Morgan, US
★★★★★ 4
Powerful easy to operate but splashes
Color: Black
Excellent frother--Very powerful and easy to turn on/off with one button. The only downside is it requires a deep container in which to froth. The frothing pitcher I had was too small and milk splashes everywhere. There is no lower speed so it works fast. I am using a deep insulated container now for frothing. Otherwise, very quite, easy to operate no pushing down on the top like other frother wands. I love it as long as I can control it to limit the splashing.
,
and
Promo Codes Available: