Pay in installments of $621.44 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 19 - Jul 24
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Nitek VH3256 - 32 Port Active Video Balun Hub32 Port Active UTP Video Hub Up to 3,000 feet (900 meters) with passive transceivers Up to 6,000 feet (1,800 meters) with active transceivers Video Receiver Hub 32 Ports Selectable 100 ft to 6,000 ft. 32 port active video hubs with built in surge suppression, ground loop isolation, gain and loss control, and video detection. Systems operate with other Nitek UTP video equipment including, video transceiver hubs, standard video balun transceivers,
-
32 Port Active UTP Video Hub -
Up to 3,000 feet (900 meters) with passive transceivers -
Up to 6,000 feet (1,800 meters) with active transceivers
Video Receiver Hub - 32 Ports - Selectable 100 ft to 6,000 ft.
32 port active video hubs with built-in surge suppression, ground loop isolation, gain and loss control, and video detection. Systems operate with other Nitek UTP video equipment including, video transceiver hubs, standard video balun transceivers, active transmitters, or any twisted pair equipped camera.
These active video hubs are multi-channel video receiver devices that provide a low cost means of receiving quality live video over Category UTP cabling. The systems can also adapt to existing communication and computer network spare pairs, or new cable installations. The VH3256 can be used on video runs up to 3,000 feet (900 meters) when used with passive transmitters, or distances of up to 6,000 feet (1,800 meters) with the Nitek TT560 active transmitter. These hubs provide superior immunity from noise and interference, even when run in common raceways with AC.
Features:
- Quality video over ordinary twisted pair cable
- Built-in surge suppression
- Built-in ground loop isolation
- Convenient access to DIP switches for accurate gain and loss control
- High immunity to noise and interference
- LEDs to indicate video detection
- Highly compact, only one rack unit in height
- Video can be run in the same cable with telephone, computer signals and power
Wire and Cable Recommendations
Twisted Sender is recommended for use with unshielded twisted pair (UTP) wiring. The systems will operate over wire gauges from 26 AWG through 12 AWG but are optimized for 24 AWG. Category cabling may be used. Individually shielded pairs should be avoided as they drastically reduce the operating range of the systems. Multi-pair cable with an overall shield is acceptable. Video can be operated in the same communication cable coexistent with telephone, computer, control signals, power voltages and other video signals. While video may be routed through telephone punch-down block terminals, any bridge-taps, also called T-taps and any resistive, capacitive or inductive devices MUST BE removed from the pair.
| Transceiver Unit | |
| Size | 1 RU x 9.5" (D) |
| Power Requirements | 24 VAC @ 450mA (Wall transformer provided with unit) |
| Video Input | Balanced low voltage current loop |
| Video Output | 1 Vpp composite video monochrome or color |
| Common Mode Rejection | >70dB |
| Video Format | RS170, NTSC, PAL, SECAM, CCIR (Color or B/W) |
| Twisted Pair Connection | Screw terminals providing balanced low voltage current loop |
| Operating Frequency | DC to 10 MHz |
| Recommended Transmission Distance |
Up to 3,000 feet (900 meters) w/Passive Baluns Up to 6,000 feet (1,800 meters) w/Active Transmitters |
| Transient Immunity | Built-in |
| Temperature Range | -20 degrees C to +55 degrees C |
| Humidity Range | 0 to 98% non-condensing |
| Enclosure Type | Standard 19" rack 1 RU in height |
| Wire Spec | 26 to 12 AWG Unshielded Twisted Pair (UTP) |
| DC Loop Resistance | 51 Ohms/1,000 feet (max) (51 Ohms/300 meters) |
| Normal Capacitance | 17pF/ft. |
| Impedance | 100 Ohms +/- 20% |
| UTP Category | 2 or better |
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy