Clear-Com BS410 2.4GHz Base Station

Clear-Com BS410 2.4GHz Base StationThe BS410 is the base station for the DX410 wireless system, used with wireless BP410 beltpacks. A single DX410 base station supports up to 15 registered BP410 beltpacks and or WH410 all in one wireless headsets. Two wire auto nulling enables fast and accurate integration with Clear Com and RTS wired partyline systems. Features 2 channels of communications 2. 4GHz license free operation Supports up to 15 beltpacks in a single system 7kHz wideband

The BS410 is the base station for the DX410 wireless system, used with wireless BP410 beltpacks. A single DX410 base station supports up to 15 registered BP410 beltpacks and/or WH410 all-in-one wireless headsets. Two-wire auto-nulling enables fast and accurate integration with Clear-Com and RTS wired partyline systems.

Features

• 2-channels of communications
• 2.4GHz license-free operation
• Supports up to 15 beltpacks in a single system
• 7kHz wideband audio
• 2-wire and 4-wire bridging on the same system
• 2-wire auto-nulling
• Lost packet concealment
• Simple to set up and configure

Specifications

• Power Requirements: 100 – 240V AC, 50 – 60Hz or 12 – 14V DC
• Environmental: Temperature: +32° - +122°F (0° - +50°C)
• Dimensions: 1.75 x 19.0 x 17.13in (HxWxD) (44 x 483 x 435mm)
• Weight: 9lbs (4.1kg)

Audio

• Channels: 2 audio channels
• Capacity: Up to 15 BP410 and/or WH410 per base station
• Full-Duplex: Yes. Single-channel = 4 in simultaneous full-duplex. Dual-channel = 3 in simultaneous full-duplex. Radio Frequency Range: 2400 – 2483.5 MHz
• Audio Frequency: 200 Hz – 7kHz
• 4-wire I/O: RJ45, 600 Ohms balanced, level adjustable, simultaneous operation with 2-wire
• 2-wire I/O: XLR-3M, XLR-3F, externally-switchable RTS or Clear-Com, 200Ω , level adjustable, null adjustable to 50dB attenuation, typical
• Aux Input: XLR-3F with ¼” (6.35mm) combo jack, 600Ω  balanced, level adjustable
• Aux Output: XLR-3M, 600Ω  balanced, level adjustable
• Headset Connector: 4-pin mini-DIN, Electret microphone
• Headset Output: 200mW into 32Ω 
• Antenna Type: External ½-wave dipole (R-TNC connector), RX/TX horizontal/vertical diversity
• System Distortion: <2%
• Communication Security: dual-slot diversity

Transmitter

• Type: Frequency Hopping, Spread Spectrum (FHSS)
• Transmit Power: 100mW burst
• Modulation Type: Gaussian filtered FSK, TDMA
• Frequency Stability: 13 ppm
• Harmonics/Spurious: Exceeds FCC and ETSI specifications over temperature

Receiver

• Type: Frequency Hopping, Spread Spectrum (FHSS)
• RF Sensitivity: <-90dBm w 10-3 BER
• Frequency Stability: 13 ppm
• Distortion: <2%